Fujifilm FinePix A201 User Guide

3. Adjustment

FinePix A201 (U/E/EG) SERVICE GUIDE

3-2-5.Environmental setting for Flash 

Adjustment

1. When adjusting the flash, it is easy to be influenced by external light, so be sure to perform the adjust-

ment in an environment that satisfies the following conditions.<Fig.2-4>

2. In order to eliminate the influence of external light, make the area around the gray chart as dark as

possible.

3. The distance between the gray chart used during the flash adjustment and the camera should be 100cm.

<Fig.2-4> Focus

100cm

Gray Chart

FinePix A201

3-2-4.Subject

Set up the camera and the pattern box inthe positions shown in the figure below.

Where the adjustment setting for the subject is "Not required",the adjustment will have no effect regard-

less of what is photographed.

For adjustments where an all-white pattern or coior bar chart is specified as the lens assembly and the

subject,adjust the distance between the camera and the subject as shown beiow.

<All-White Pattern>

Remove the chart from the pattern box and adjust the distance between the camera and the pattern box

so that the entire screen in white. <Fig.2-2>

Pattern box center with no chart and filter LB140

Minolta LS-110 Luminance Meter

Pattern box center with no chart and filter LB140

Minolta COLOR METER 3F

<Fig.2-2> Subject

PATTERN

BOX

45+-5mm

FinePix A201

LB140 FILTER