HP Photosmart 735 User Guide

Page of 116
26
hp photosmart 730 series user’s manual
NOTE 
If you change other camera settings, icons for those 
settings will also be displayed across the top and bottom 
of the 
Live View 
screen. For more information, see 
Using the focus brackets
The two brackets in the middle of the 
Live View
 screen show the 
focus region for the picture you are taking. When you press the 
Shutter
 button halfway down, the camera uses this focus region 
to measure and then lock the focus using this region. This is 
called 
Focus Lock.
The focus brackets turn green in the 
Live View
 screen and the 
AF
 viewfinder light turns on solid green when the image is in 
focus and the camera can lock the focus. However, the focus 
brackets turn red and the 
AF
 viewfinder light blinks green when 
the camera is unable to focus.
If the focus brackets turn red and the 
AF
 viewfinder light blinks, 
release the 
Shutter
 button, re-frame the subject for your picture, 
and then press the 
Shutter
 button halfway down again. If the 
camera still cannot focus after several tries, the lighting may be 
too low, or there may not be enough contrast in the focus 
region. Try using 
Focus Lock
 to focus on an object about the 
same distance away but in a higher-contrast region, then point 
the camera at the object you were originally trying to 
photograph.
4
Battery level (actual icon shown depends on the 
state of your camera batteries; see 
5
Focus brackets (see the next section, 
Using the focus 
brackets
).
#
Icon Description