Jenoptik JD C 3.0 S User Guide

Page of 31
18
PRINTING STORED PICTURES
SELECTING PICTURES FOR PRINTING 
You can select pictures that were stored on SD card for direct printing by a photo developing service 
center or on a direct print compatible printer.
1.  In Review mode, press the Menu button
2. Press   or 
 button to highlight DPOF.
3. Press the   or 
 button to highlight Set, and then press the Menu button. A small window will 
be shown on the LCD.
4. Press the   or 
 button to set the number of copies of the current picture. After it is set, press  
 or 
 button to skip to other pictures that is to be printed.
5.  When all the pictures to be printed are set, press the Menu button to confirm and at the same time 
to exit DPOF setting mode.
• The 
icon 
P
 will appear on the upper left corner of the LCD, which indicates the picture is 
selected for direct printing. 
PRINTING PICTURES DIRECTLY
1.  Select the desired pictures (see ‘Selecting Pictures for Printing’ section).
2.  Take the SD card out of the camera.
3.  Insert the SD card into the SD card slot of a direct printing compatible printer.
4.  Refer to the instruction manual of the printer to print the pictures.
DPOF
Cancel
Cancel
Set
000
PRINTING STORED PICTURES