Jenoptik JD C 3.0 S User Guide

GETTING STARTED

7

Press and hold the Power button for a few second to turn the camera 
on. The blue Flash Status LED will light up first, and then the LCD will 
turn on automatically. 

The camera will be turned on at the last set mode. Refer to page 8 to 
switch the camera to desired mode.

                                  
The camera will automatically power off after being idled for around 30 seconds by default. To power 
off the camera sooner, press and hold the Power button for a few seconds.

 Note: Refer to page 14 to adjust auto power off timing.

The camera has a 1.5” LCD which can frame subjects for image and 
video clip capture, review stored images and video clips and to display 
the current camera settings.

Press the LCD On/Off button to toggle the LCD mode. The LCD mode 
changes each time the button is pressed. 

          LCD on with icons 

Icons off 

LCD off                 

Note: 
•  To save battery power, you may turn off the LCD display. 
• In 

(

) Review Mode, the LCD changes as below when the LCD On/Off button is pressed 

repeatedly:       LCD on with icons 

Icons off 

Thumbnail view                 

Power button

LCD On/Off button