Kodak DC290 User Guide

14

 

The camera uses a removable memory card, also referred to as a CompactFlash 
or KODAK Picture Card, for storing your pictures. The camera cannot take 
pictures without the memory card. You can erase or protect the picture data on 
the card and then reuse it. To reformat a memory card, see page 42.

The removable memory card contains no moving parts. It stores information and 
retains it when the card is removed from your camera or until you either delete it 
or reformat the card. Normal magnetic interference and airport x-rays do not 
harm the stored information.

The KODAK Picture Card is furnished with your camera. Additional memory 
cards are available from dealers of KODAK products or from our Website at 
http://www.kodak.com/go/accessories. Any standard CompactFlash card that is 
“CF” certified will function properly. 

 

Open the memory card door.

Insert the memory card so that the:

‰

pin-connector edge of the card enters the 
camera first

‰

small lip on the memory card is toward the 
front of the camera

Close the door.

Open the memory card door.

Flip the memory card Release button so it 
protrudes out from the side of the camera. 

WARNING: Do not press the Release button if the 
red LED under the button is on or blinking. 
Ejecting the card while this LED is on can result in 
the loss of all data on the card. 

Press Release to release the memory card from 
the camera.

Pull the memory card out of the camera.