Sony Cybershot DSC P50 User Guide
70
SETUP 2
Notes on [DATE/TIME]
•
The date and time do not appear on the LCD screen during shooting. These appear during
playback.
playback.
•
The date and time are not superimposed onto moving images and Clip Motion images.
Item
Setting
Description
LCD
BRIGHTNESS
BRIGHTNESS
BRIGHT
x NORMAL
DARK
Selects the LCD brightness.
This has no effect on the recorded images.
This has no effect on the recorded images.
LCD
BACKLIGHT
BACKLIGHT
BRIGHT
x NORMAL
Displayed only when using your camera
with the battery pack:
Selects the brightness of the LCD backlight.
Lets you set the brightness of the LCD
backlight to [BRIGHT] or [NORMAL].
Selecting [BRIGHT] makes the screen
bright and easy to see when using the
camera outdoors or in other bright locations,
but also uses up the battery charge faster.
with the battery pack:
Selects the brightness of the LCD backlight.
Lets you set the brightness of the LCD
backlight to [BRIGHT] or [NORMAL].
Selecting [BRIGHT] makes the screen
bright and easy to see when using the
camera outdoors or in other bright locations,
but also uses up the battery charge faster.
BEEP
SHUTTER
Turns on the shutter sound only. (The shutter
sound is heard when you press the shutter
button.)
sound is heard when you press the shutter
button.)
x ON
Turns on the beep/shutter sound (when you
press the control button/shutter button).
press the control button/shutter button).
OFF
Turns off the beep/shutter sound.
VIDEO OUT
NTSC
Sets the video output signal to NTSC mode
(e.g., Japan, the USA) (page 74).
(e.g., Japan, the USA) (page 74).
PAL
Sets the video output signal to PAL mode
(e.g., Europe) (page 74).
(e.g., Europe) (page 74).
USB CONNECT
PTP
Switches the USB mode (page 30).
x NORMAL
POWER SAVE
x ON
Set to ON to extend the battery life when
operating the camera with batteries.
operating the camera with batteries.
OFF
When POWER SAVE is set to ON, the time
from when you press the shutter button until
the image is recorded is longer than normal
(pages 11, 88).
The LCD screen turns off while the flash is
charging.
from when you press the shutter button until
the image is recorded is longer than normal
(pages 11, 88).
The LCD screen turns off while the flash is
charging.
DEMO
x ON/STBY
Displayed only when you use your camera
with the AC power adaptor. [DEMO] is set
to [STBY] at the factory and the
demonstration starts about 10 minutes after
you have set the mode dial to
with the AC power adaptor. [DEMO] is set
to [STBY] at the factory and the
demonstration starts about 10 minutes after
you have set the mode dial to
or
. To
cancel the demonstration, turn off the power.
OFF