Sima SL-20LX User Manual

Introduction

To charge the batteries:

Special Notes:

Specifications:

The Sima LED Universal Video Light

Model SL-20LX can be mounted on
the universal accessory shoe of any
camcorder or digital camera by sliding
it into place and tightening the
mounting screw. (If your camcorder
does not have a shoe mount, the Sima
Video Bracket included can provide a
mounting platform.

Batteries:

The SL-20LX comes with a

rechargeable, non-replaceable Lithium
ion battery. The battery comes pre-
installed from the manufacturer. Prior
to use, the battery must be charged
2.5 to 3 hrs. Note: use only the
supplied AC adapter/charger to charge
the battery.

Because of its long lifetime the Lithium
ion battery in this unit does not need to
be replaced.

Insert the jack on the power cord into the

power input jack on the rear of the SL-20LX
(Fig. 1).

Plug AC transformer into a standard

120 VAC wall outlet. The red LED indicator
light, beside the power jack, will turn on.

The battery must charge 2.5 to 3 hours

before it is fully charged. Note: indicator
light will turn green when charging is
complete.

A fully charged

   battery will
   provide
   45 to 60

minutes of

run time.

Note: Light does
not work with AC
adapter plugged
in unit’s power
jack.

•

For maximum illumination, use the patent-

pending interlocking design to construct a
multi-light array.

• When using multiple lights

, each light

must be charged individually.

•

The lens has been frosted to diffuse light

evenly and eliminate hot spots.

•

Light does not work with AC adapter

plugged in unit’s power jack.

Operation:

Turn light on or off by sliding the ON/OFF
switch to the desired position as shown below

LEDs: 36, ~4500 Color Balanced

Power: Lithium ion

Run Time: 45 to 60 Minutes
depending on battery usage.

Charge Time: 3hrs for a full charge

Battery Type: 3.7V 730mA Li-ion

Charger: 120V AC input; 5V DC
output

Weight: 2.5oz (with battery).

Size: 2.35” x 2.3” x 1”

Effective Range: 10’ to 25’