Pro-Ject Phono Box SE II 3081110086 Leaflet
Product codes
3081110086
Pro-Ject Audio Systems is a registered trademark of Heinz Lichtenegger
1050 Vienna · Margareten Road 98 · Tel. +43(0)15448580 · Fax. +43(0)15456697
www.project-audio.com · © Heinz Lichtenegger · Revision 1
.6.10
Pro-Ject Phono Box SE II
MM/MC Phono Pre-amplifier
Product information
Good sound from sound technology
Metal case shields the electronics from vibrational and electromagnetic interference
Selectable impedance for MC cartridges
Selectable load resistance for MM cartridges
Optimal channel separation through dual-mono circuitry
Subsonic filter selection switch located at the rear of the unit
Special low-noise ICs used
Gold plated RCA connection sockets
Outboard power supply included
DC operation with battery possible
Features
Amplification and RIAA equalisation for MM and MC cartridges
Technical specifications
Input impedances, MM:
120, 220, 340 and 440pf/47kohm
Input impedances, MC:
17, 18, 20, 22, 69, 100 and 220ohms/120pF
Output voltage:
300mV/1kHz at 3mV (MM input)
Gain, MM:
40dB
Output voltage:
300mV/1kHz at 0,3mV (MC input)
Gain, MC:
60dB
Noise floor, MM:
95dB (100dB / A weighted)
Noise floor, MC:
75dB (80dB / A weighted)
THD MM:
0,03%
THD MC:
0,1%
RIAA-equalisation curve accuracy:
20Hz - 20kHz / max. 0,3dB
Subsonic filter:
at 18Hz with 24dB/octave
Outboard power supply:
16V/1.000mA AC, suitable for your country's mains supply
DC operation with battery
Power consumption:
16V/180mA AC
DC power source:
from ±12 to ±18V DC
Dimensions W x H x D (D with sockets): 103 x 72 x 144 (156)mm
Weight:
Weight:
1.050g without power supply
The manufacturer reserves the right to alter the technical specifications without notice.
Available in silver or black finish