Pro-Ject Xperience SuperPack 2 3081110074 Leaflet

Pro-Ject Audio Systems is a registered trademark of Heinz Lichtenegger 

1050 Vienna · Margareten Road 98 · Tel. +43(0)15448580 · Fax. +43(0)15456697 

www.project-audio.com · © Heinz Lichtenegger · Revision 1.12.08 

 

 

Pro-Ject 2 

perience 

SuperPack 1 & 2 

Manual turntable with fitted cartridge 

Ortofon MC Rondo Red or Ortofon MC Salsa 
and Pro-Ject Speed Box 

Product information

 

Turntable 

 

A quiet running AC motor with a two-step acryl pulley drives the platter's outside edge via a belt. 

 

The transparent acrylic plinth stands on three height-adjustable Sorbothane

®

-damped aluminium cones. 

 

The motor is decoupled from the plinth to reduce vibration transmission. 

 

The resonance-optimised platter is a sandwich construction utilising the hub, a fine-balanced medium density 
fibre platter weighing 2Kg, a 4mm thick flat-ground layer of vinyl and a screw-down metal record clamp. 

 

The platter's low-tolerance chrome-plated stainless-steel axle runs on a Teflon bearing plate in a sintered 
bronze bearing housing. 

 

Electronic speed change for 33/45 r.p.m. 

 

Connection to the phono input of the amplifier can be made with connecting cables of your taste through the 
gold plated phono sockets and earth screw. A standard cable is provided. 

 

External power supply avoids potential electro-mechanical interference. 

Tonearm  Pro-Ject 9c

 

 

SuperPack 1: The turntable is supplied with Ortofon MC Rondo Red low output MC-cartridge fitted. 
SuperPack 2: The turntable is supplied with Ortofon MC Salsa low output MC-cartridge fitted. 

 

Conical carbon-fibre armtube avoids standing wave reflections. 

 

Low mass aluminium headshell securely glued to armtube. 

 

The inverted bearings consist of four hardened stainless steel points bearing in sapphire cushes. 

 

Flexible counterweight shaft avoids vibration at undesirable frequencies. 

 

Solid armbase permits accurate height adjustment of armtube and VTA (vertical tracing angle). 

 

Single-screw fixing of armtube allows rotation for easy adjustment of needle azimuth despite fixed headshell. 

 

The straight armtube with an effective length of  9" reduces toe-in error. 

 

Silicone-damped armlift can be adjusted to suit working height of the arm. 

 

The internal wiring consists of flexible high-purity copper from the headshell right through to the gold-plated 
phono sockets. 

Dimensions W x H x D: With dust cover closed 460 x 133 x 360mm, dust cover open 460 x 390 x 460mm. 
SuperPack 1, cartridge: Output voltage 0,30mV. Recommended load resistance > 10 ohms (MC-input). 
SuperPack 2, cartridge: Output voltage 0,38mV. Recommended load resistance > 20 ohms (MC-input). 

The manufacturer reserves the right to alter the technical specifications without notice.