HoMedics QRM-400 User Manual

Page of 8
NOTE: The moving
massage mechanism
always “parks” or
finishes in its lowest
position. It will
continue to this
position after the
power has been 
turned off. If the
electrical supply is
interrupted, when
power is restored, 
the mechanism will
“park” or move to 
its lowest position.
Demo Button 
For a brief demonstration of the features of the Quad-Roller
Massaging Cushion, press the Demo button. The unit will
complete one cycle combining Shiatsu and Rolling
massage. Once complete, the unit automatically turns off.
Rolling Massage
Rolling is like two hands working slowly up and down 
your back.
Width Adjustment
While the unit is in Rolling massage, press this button to
adjust the distance or width between the massage heads.
With each press, the massage heads will move to the next
available position.
Rolling Programs
Choose from 3 preset programs where the Rolling massage
travels up and down in a specific area of the back. To select
a program, simply press the button and the L.E.D. will
illuminate.  To deselect, press the button again or press
another button.
NOTE:  There is a 15-minute auto shut off
on the unit for your safety.
Power Button
To turn on the massage
functions, first press the
POWER button. The L.E.D.
indicator will illuminate and
confirm your selection. To
turn off the massage
functions, simply press the
button again. The L.E.D.
indicator will blink while
the massage mechanism
returns to its lowest point
and then it will turn off.
Power Adaptor
The Quad-Roller
Massaging Cushion is
powered by a custom 120
volt AC adaptor, which is
included with your unit.
Shiatsu Massage
Shiatsu is a deep 
kneading massage.
Shiatsu Programs
Choose from 3 preset
programs where the Shiatsu
massage travels up and down
in a specific area of the back.
To select a program, simply
press the button and the L.E.D.
will illuminate.  To deselect,
press the button again or press
another button.
Spot Shiatsu 
While the unit is in Shiatsu
massage, press either button to
stop and focus the Shiatsu
action in one place.  Once the
unit is operating in Spot
Shiatsu, you may adjust the
mechanism position by
holding down either button
until the desired position is
reached.  The Up Arrow will
move the mechanism upwards
and the Down Arrow will move
it down.  Once you release the
button, the mechanism will
stop in that place.
Removable Flap
Remove for a more 
intense back massage.
Moving Quad-Roller
massage mechanism
With L.E.D. illumination
6
7
Quad-Roller Massaging Cushion
Moving Quad-Roller Massage Mechanism