Binatone 80-7638-01 User Manual

48

Help

•  Make sure the Bluetooth function of your Bluetooth 

enabled mobile phone is turned on. See your mobile 

phone user's manual for more information.

•  Make sure the cordless handset, corded base and 

cell phone are located near each other.

• Remove 

the 

L515CBT from your mobile phone's Bluetooth device 

history list (see your mobile phone user's manual for 

more information).

•  Carefully follow the pairing instructions in the user's 

guide, making sure that your mobile phone is not 

connected to any other Bluetooth device(s).

•  Turn off your mobile phone, and then turn it on 

again.

•  Reset the telephone base. Unplug the unit's 

electrical power. Wait for approximately 15 seconds, 

and then plug it back in. Repeat the above 

suggestions.

•  Incomplete battery contact - adjust the cordless 

handset on the charger.

•  Dirty contact - clean the battery contact by wiping 

with an alcohol moistened cloth.

•  Battery is full - charging is not necessary at this time.

•  If there is no base power, check the connections. 

Reset the phone by unplugging then plugging it back 

into an electrical outlet.

•  If the cordless handset batteries are empty, 

recharge the battery pack for at least 24 hours.

•  Move the cordless handset closer to the corded 

base if it is too far away.

•  Be sure to use the provided telephone cords.

•  If the corded base is too close to electrical 

appliances, reinforced concrete walls, or metal door 

frames, move the corded base from these areas.

•  The ring tone may be deactivated.

•  The volume may need to be increased.