Dickson/Unigage 62831853 User Manual
4
Repeater (WA200):
Extends the distance of a Logger from the Receiver by forwarding the data
packet from the Logger to the Receiver.
Must be setup in the WiZARD2 Software in order to operate.
Logger(s) must be told to send data packet to the Repeater not the
Receiver.
Repeater can forward data packets for multiple Loggers.
Repeaters can forward data packets to another Repeater.
Repeaters do not require calibration.
Signal Sensor (WS200):
Allows the user to determine the signal strength of the Receiver, and any
setup Repeaters, at a current or potential Logger or Repeater location.
Does not look for Loggers only Repeaters and Receivers
Highly recommended for users with multiple Loggers or Loggers over 200
ft. from the Receiver
FRONT
BACK
Manual Index
LED (See Tech Support for Details)
On/Off Switch
Push-to-Start (Loggers Only)
AC Power Jack
USB Jack
K-TC Jack (WT240 Logger Only)
TH Probe Jack (WH245 Only)
Screw Hole Mount
4 AA Batteries