Cypress Semiconductor 3033 User Manual

EZ-BT™ Module

•

198 Champion Court

•

San Jose

,

CA 95134-1709

•

408-943-2600

Document Number: 002-18414 Rev. ** 

 Revised January 27, 2017

The Cypress CYBT-013033-01 is a certified module supporting
dual-mode Bluetooth

® 

Classic (BR/EDR) and Bluetooth

®

 Low

Energy (BLE) wireless communication standards. The
CYBT-013033-01 is a turnkey solution and includes an onboard
crystal oscillator, PCB trace antenna, passive components, and
Cypress CYW20707 silicon device.

The CYBT-013033-01 is a custom RF module design intended
to provide Bluetooth

 

Classic and BLE communication, and allow

up to two GPIO connections for system or module wake events.
The CYBT-013033-01 supports UART and BSC (I2C
compatible) serial communication, and allows for interface to the
Apple MFi Coprocessor chip (via the BSC connection). 

The Cypress CYBT-013033-01 complies with Bluetooth Core
Specification version 4.2+HS and is designed for use in UART
HCI applications. The combination of the Bluetooth Baseband
Core (BBC), a Peripheral Transport Unit (PTU), and a Cortex-M3
based microprocessor with on-chip ROM provides a lower and
upper layer Bluetooth stack, including Link Controller (LC), Link
Manager (LM), and HCI. 

■

Module size: 10.0 mm × 15.0 mm × 2.25 mm (with shield)

■

Bluetooth dual-mode module, complying with Bluetooth Core
Specification 4.2 including BR/EDR/BLE

■

Supports maximum Bluetooth data rates over HCI UART

■

Temperature range: –30 °C to +85 °C

■

ARM

®

 Cortex

®

-M3 processor

■

Multiple serial interface options: 

❐

UART: HCI interface supporting up to 4 Mbps

❐

BSC (I2C compatible): Supporting 400 kHz clock support

■

Apple MFi Coprocessor interface

■

2 GPIOs 

■

Certified to FCC, CE, MIC, and IC regulations

❐

FCC ID: WAP3033

❐

IC ID: 7922A-3033

❐

MIC ID: TBD

■

Bluetooth SIG 4.2 qualified

❐

QDID: TBD

❐

Declaration ID: TBD

The CYBT-013033-01 module is provided as a turnkey solution,
including all necessary hardware required to use BR, EDR, and
BLE communication standards. 

■

Proven, qualified, and certified hardware design ready to use

■

Small footprint (10 × 15 mm × 2.25 mm), perfect for space
constrained applications

■

Fully certified module eliminates the time needed for design,
development and certification processes 

■

Bluetooth SIG qualified with QDID and Declaration ID

■

Multiple serial communication protocol support

■

Interface option for Apple MFi Authentication Coprocessor

■

WICED Studio provides an easy-to-use integrated design
environment (IDE) to configure, develop, program, and test
your application.