PDI Communication System Inc. P40LCDEN User Manual

 

Page 3 of 12 

 

PDi Communication Systems, Inc.   40 Greenwood Lane   Springboro, Ohio 45066 USA   PH +1-937-743-6010 PH +1-937-743-5664  

 

Document Number:  PD196I190R1.DOC 

  

The PDI-P26LCD TV

is mounted to the wall with a PD168-103 mount (Not supplied with TV)

or a PD168-203 mount 

(Not supplied with TV). The PD168-203 mount is a heavy duty mount and is to be used if a DVD or an IPT module is 
going to be mounted on the P26. A PD168-203 wall mount connects to a PD181-674 LCD mount. A PD168-103 wall 
mount connects to a PD181-597 LCD mount. 

 

 

 

 

 

 

M4 x 6mm  

Screws  

Pilfer  

Screws  

LCD mount 

Wall Mount 

 

 

 

 

 
Attach with the four M4 screws (PDIPPHMSM4X76) that 
are provided. 
 
4. Mate the LCD mount to the wall mount, making sure the 
pivot pins are retained in the slots. 
 
5.  Secure with two 10x32 Pilfer screws 
(PDIPPBHSCS103250). 

6. The TV’s tilt can be adjusted by loosening both Pilfer 
screws, adjusting tilt, and then tightening the screws.

 

PD168-103 PD181-597 

For mounting PDI-
P26LCD TV to wall 
without DVD 
and/or IPT 
Modules (1) 

PD168-203 

PD181-674 

For mounting PDI-
P26LCD TV to wall 
with DVD and/or 
IPT Modules (1) 

PDIPPBHSCS103250 

10-32 X ½ Pilfer 

Proof PIH Button 

Head (2) 

PDIPPHMSM4X76 

M4-.7 X 6MM 

PPHMS (4) 

Numbers in parenthesis represent quantity 

 
1. Refer to Figure 1.  Select a location on the wall 
approximately 9 inches below the ceiling.   
 

NOTE: DO NOT locate AC, Across-Room 
Wiring, and CATV Signal outlets below the 
Wall Bracket’s location as it will cause 
clearance issues and interfere with the TV’s 
cabinet when mounted to the bracket.   
 

2. Position the wall mount and locate the two 
mounting holes.  Secure the bracket to the wall 
(mounting hardware is not included).   

3. Refer to Figure 2.  Position the LCD mount on 
the LCD TV cabinet.