Eltako FAFT60 30000458 Leaflet

Wireless Sensor Wireless Outdoor Humidity 
Temperature Sensor FAFT60

The electronic requires no intrinsic power supply, so there is no standby loss.

The wireless outside humidity temperature sensor FAFT60 powered by a solar module continuously 
measures the relative air humidity between 0 and 100% (±5%) and temperature between -20 
and +60°C (±0.5°C). Of course, it performs these functions not only outdoors but also indoors, 
provided the brightness is sufficient.

A wireless telegram is sent to the Eltako wireless network when humidity changes by 2% and in 
case of a temperature change of 0.6°C. If readings remain constant, a control message is sent 
every 100 to 3000 seconds, depending on the charge state of the sensor.

To teach-in in an actuator in teach-in mode, hold the supplied blue magnet or any other 
magnet at hand below the point on the side panel of the sensor marked by 

■

. This sends 

a teach-in telegram. 

Solar-powered energy accumulator:
Before startup the energy accumulator must be charged. 
The charge time is approx. 5 hours at 400 Lux. Keep the cover of the solar cell clean!

The protection class is IP54, the allowable ambient temperature is -20°C to +55°C.

For screw mounting or attachment with adhesive. The scope of supply comprises an adhesive foil.

FAFT60 

     

 

 

Wireless outdoor humidity temperature sensor

EAN 4010312310120

109,40 €/pc.    

   

Recommended retail prices excluding VAT.