Linak BLE2LIN User Manual
Page 12 of 44
Misc. on the DESKLINE
®
system
Warranty
There is a 60 months’ warranty on the DESKLINE products Controls / Hand controls when used in DESKLINE applications
against manufacturing faults from the production date of the individual products. LINAK A/S’ warranty is only valid in so far as
the equipment has been used and maintained correctly and has not been tampered with. Furthermore, the system must not be
exposed to violent treatment. In the event of this, the warranty will be ineffective/invalid. For further details, please see LINAK
A/S’ ordinary conditions of sale.
There is a 60 months’ warranty on the DESKLINE products Controls / Hand controls when used in DESKLINE applications
against manufacturing faults from the production date of the individual products. LINAK A/S’ warranty is only valid in so far as
the equipment has been used and maintained correctly and has not been tampered with. Furthermore, the system must not be
exposed to violent treatment. In the event of this, the warranty will be ineffective/invalid. For further details, please see LINAK
A/S’ ordinary conditions of sale.
Maintenance
Clean dust and dirt on the outside of the system at appropriate intervals and inspect for damage and breaks.
Inspect the connections, cables, and plugs and check for correct functioning as well as fixing points.
Clean dust and dirt on the outside of the system at appropriate intervals and inspect for damage and breaks.
Inspect the connections, cables, and plugs and check for correct functioning as well as fixing points.
The cleaners and disinfectants must not be highly alkaline or acidic (pH value 6-8).
ETL-marking
Due to space limitations, the complete ETL-marking demands are not represented on the marking plates.
The full ETL Recognized Component markings are shown here.
The full ETL Recognized Component markings are shown here.
C/N 120690
Conforms to ANSI/AAMI Std. ES60601-1
Cert. to CSA Std. C22.2 No. 60601-1
Cert. to CSA Std. C22.2 No. 60601-1
ETL Recognized Component mark for Canada and United States
C/N 4008003
Conforms to ANSI/AAMI Std. ES60601-1
Cert. to CSA Std. C22.2 No. 60601-1
Cert. to CSA Std. C22.2 No. 60601-1
ETL Recognized Component mark for Canada and United States
C/N 4008004
Conforms to ANSI/AAMI Std. ES60601-1
Cert. to CSA Std. C22.2 No. 60601-1
Cert. to CSA Std. C22.2 No. 60601-1
ETL Recognized Component mark for Canada and United States
C/N 9901916
Conforms to ANSI/AAMI Std. ES60601-1
Cert. to CSA Std. C22.2 No. 60601-1
Cert. to CSA Std. C22.2 No. 60601-1
ETL Recognized Component mark for Canada and United States
C/N 4008671
Conforms to UL962
Cert. to CSA Std. C22.2 No. 68-09
Cert. to CSA Std. C22.2 No. 68-09
ETL Recognized Component mark for Canada and United States