Hansong Technology Ltd. HSMLV2E User Manual

BasiC COnFiguratiOn

1. Connect the tX100 transmitter to the computer.

2. Connect both lv2e speakers to 230v outlet.

3. set the house Code on the transmitter and speakers.

done! play your music on your computer.

wireless status:

led lights up blue on speakers and transmitters when wireless connection is established.

led lights up red on speakers and transmitters when no wireless connection is established.

Note:

If speakers are in standby mode, LED is red even though wireless connection is established.

Turns blue when speakers receives signal.

maC seTuP

1. insert tX100 transmitter

to a free usB socket.

2. go to system preferences,

choose sound under hardware.

3. Click Output in menu,

choose “usB headset”.

done! you can now send

audio from your computer.

PC seTuP

Please do following setup before using music playing

software.

1. insert tX100 transmitter to a free usB socket.

wait until software has been installed.

(see lower right hand corner, message window

will open when sound device is ready to use.)

done! you can now send audio from your computer.

For some PC computers you may need to perform

these settings:

2. Click start button, go to Control panel and choose

sound & sound devices.

3. under playback of audio, default unit, choose

“usB headset”.

done! you can now send audio from your computer.

tips and inspiratiOn

On our homepage, www.audiopro.se, we share our experiences and also tips
regarding wireless audio. A few examples:
- Play your audio wirelessly directly from iPad/iPhone/iPod touch
- Play your audio wirelessly directly from an Android OS device
- We give you tips about a number of easy hook-ups and multiroom solutions

visit us at Facebook to find out more about audio pro and our products.
www.facebook.com/audiopro

Before connecting to computer, see Mac or PC setup.

add mOre lv2e speakers tO the audiO netwOrk

Changing hOuse COde and vOlume ZOne

use lv2e with lv-suB suBwOOFer

COnneCt tO any anOther audiO sOurCe

you can add limitless number of lv2e speakers to your system within wireless range of transmitter.

all lv2e spekaers receives wireless signal from transmitter using same house Code.

you can add more speakers to one room, or add speakers in several rooms.

the rear panel has buttons for changing the house Code and Zone.

push to change the house Code: 1 - 2 - 3, and back to 1.

push to change the Zone: a - B - C, and back to a.

Note: House Code and Zone buttons on the remote control only

show the selected House Code/Zone. Any changes must be made

on the speaker.

lv2e can be used in two modes, satellite or fullrange. the satellite

mode is adapted for use together with living lv-suB. push and hold

both the house Code and Zone buttons for 3 seconds, sat will be

shown in the display. to switch to fullrange, repeat the same proce-

dure. repeat the procedure on both speakers.

Note: In satellite mode, frequencies under 80Hz are disregarded for

LV2e frequency playback. When LV2e is used in satellite mode toge-

ther with LV-SUB, you can play back at a considerably higher volume.

the tX100 transmitter can be connected to any audio source with

an audio output (e.g. a headset outl). Connect a cable to the audio

source and the audio input on tX100. tX100 is then powered with a

separate usB power supply (available as an extra accessory).

Example: connect to iPad/iPhone dock, Airport Express, TV, radio,

stereo/receiver, mobile phone, network player, NAS, media player.

SAT