Bently Nevada Inc. 18531001 User Manual
Essential Insight.mesh
TM
Installation and Maintenance Manual
34
Cables for the 200125 K-Type thermocouple come
with an integrated cable. Field connectors must be
installed using the field termination connector (P/N
162438-01). These field termination connectors can
also be used with industry standard K, J, T, and E-
Type thermocouples.
with an integrated cable. Field connectors must be
installed using the field termination connector (P/N
162438-01). These field termination connectors can
also be used with industry standard K, J, T, and E-
Type thermocouples.
NOTE
The radiation pattern of the wSIM or Repeater
antenna can be a factor when deciding on the
location and mounting orientation of a wSIM or
Repeater. Mount the wSIMs and Repeaters
vertically for best results.
5.3.2 Mount a wSIM or Repeater
To mount a wSIM or Repeater:
1. Identify the mounting hardware.
2. Install the mounting base.
3. Mount the wSIM or Repeater to the
mounting base and secure.
After a mounting location has been determined,
mount the wSIM or Repeater using either the hex
mounting base or the magnet mount.
mount the wSIM or Repeater using either the hex
mounting base or the magnet mount.