Accell D080B-008K Leaflet
PowerSquid® Surge Protector and Power Conditioner
Thank you for purchasing the PowerSquid Surge Protector and Power Conditioner. The PowerSquid is a safe and easy way to convert 1-
grounded wall outlet to 5-grounded surge protected and adapter-compatible outlets. The PowerSquid provides 1080 Joules of surge
protection, accommodating up to 5 bulky transformer plugs with ease. The PowerSquid also features Power Conditioning which reduces
audio and video noise caused by EMI and RF interference.
READ ME FIRST–SAFETY INFORMATION
Grounding - This product features a three-prong grounded AC plug designed for use with a grounded three-prong power outlet. If the
plug does not fit into the power outlet, do not force. Do not alter the plug. Contact a qualified electrician for information on installing a
grounded outlet. Use with an ungrounded power outlet will void all Accell warranties.
Adapting the Power Cord - Your PowerSquid surge protector should be plugged directly into a properly grounded outlet. Using any
extension cord, adapters, other grounding wires or electrical connections in conjunction with the surge protector will void all Accell
warranties.
Liquids - Do not use this product near or around water (i.e., aquariums, bathrooms, kitchens, laundry room) or in conditions that may
expose it to liquid. Do not operate the product if liquid is spilled on or is near it.
Heat - Do not expose this product to direct sunlight or place it near a heater or in an enclosed area prone to high heat. The PowerSquid
is not user serviceable. Should the unit become damaged or non-operational, please unplug the unit and consult the Warranty section of
this manual for details.
Low Voltage - Standard surge protectors are not designed to protect against sustained low voltage situations. Sustained low voltage
situations can cause damage to some connected equipment. If you are in an area prone to sustained low voltage situations, you should
purchase an Uninterrupted Power Supply (UPS) with surge protection.
Thank you for purchasing the PowerSquid Surge Protector and Power Conditioner. The PowerSquid is a safe and easy way to convert 1-
grounded wall outlet to 5-grounded surge protected and adapter-compatible outlets. The PowerSquid provides 1080 Joules of surge
protection, accommodating up to 5 bulky transformer plugs with ease. The PowerSquid also features Power Conditioning which reduces
audio and video noise caused by EMI and RF interference.
READ ME FIRST–SAFETY INFORMATION
Grounding - This product features a three-prong grounded AC plug designed for use with a grounded three-prong power outlet. If the
plug does not fit into the power outlet, do not force. Do not alter the plug. Contact a qualified electrician for information on installing a
grounded outlet. Use with an ungrounded power outlet will void all Accell warranties.
Adapting the Power Cord - Your PowerSquid surge protector should be plugged directly into a properly grounded outlet. Using any
extension cord, adapters, other grounding wires or electrical connections in conjunction with the surge protector will void all Accell
warranties.
Liquids - Do not use this product near or around water (i.e., aquariums, bathrooms, kitchens, laundry room) or in conditions that may
expose it to liquid. Do not operate the product if liquid is spilled on or is near it.
Heat - Do not expose this product to direct sunlight or place it near a heater or in an enclosed area prone to high heat. The PowerSquid
is not user serviceable. Should the unit become damaged or non-operational, please unplug the unit and consult the Warranty section of
this manual for details.
Low Voltage - Standard surge protectors are not designed to protect against sustained low voltage situations. Sustained low voltage
situations can cause damage to some connected equipment. If you are in an area prone to sustained low voltage situations, you should
purchase an Uninterrupted Power Supply (UPS) with surge protection.
Specifications
Electrical Rating: 120V, 15Amps, 1800 Watts
Maximum Energy Dissipation: 1080 JOULES
Maximum Spike Current: 72,000 AMPS
UL-1449 3rd. Edition
Clamp Rating: H-N 400V, H-G 400V, N-G 400V
Response Time: Instantaneous (Less than 1 Nanosecond)
Circuit Breaker: 15 AMPS (Resettable)
Protection Working Indicator: Red LED
Ground Power Indicator: Green LED
EMI/RFI Noise Reduction: Up to 40dB from 150 KHz to 100 MHz
3 ft. Heavy Duty Grounded Power Cord
2-Way Wall Mountable
Rubber Feet Prevent Sliding
Drop Tested ABS Housing
Recessed Master Power Button Prevents Accidental Switching
POWER BUTTON WITH 15 AMP CIRCUIT BREAKER
To protect itself from damage, the PowerSquid will turn off if any of the devices that are plugged-in malfunction or if the total power drawn
exceeds 1800 Watts. Simply remove any damaged connected devices or those devices as needed to be under the 1800-Watt capacity.
Push the Power Button to reset the circuit breaker.
A lighted Green Power Indicator LED indicates that the wall outlet is providing power to the PowerSquid. If the Power LED is not lighted,
press the Power Button. If still no power is going to the PowerSquid, check if the power outlet is controlled by a light switch. Plug another
device into the wall outlet to determine if the wall outlet is working properly.
A lighted Green Grounded Indicator LED indicates that the wall outlet the PowerSquid is plugged into is grounded. While power is On
(Power indicator green LED is lighted), if the Ground LED is not lighted, remove the PowerSquid from the wall outlet as it is unsuitable for
use with the PowerSquid.
A lighted Red Protected Indicator LED indicates that the surge protection is active. While power is On (Power indicator green LED is
lighted), if Protected LED is not lighted, the PowerSquid surge protection has been disabled. Unplug and discontinue use of the
PowerSquid and contact Accell Customer Service.
Note: This product, like all surge protectors, has a limited life. Even under normal circumstances, and in the absence of defects, the
product’s life will end when the components providing surge protection exceed capacity and cease to provide protection from surges and
spikes. The PowerSquid will cease to conduct power through the unit once the MOV’s have reached capacity. In the event of an over-
voltage condition, the circuit breaker will trip, and the unit will not conduct electricity. The user can reset the circuit after the event to
restore surge protection. If the red led goes does goes out, the PowerSquid needs to be replaced.
WALL MOUNTABLE
Two-way wall mountable, the PowerSquid can easily mount to a wall to save space, to put out-of-sight or for improved accessibility. To
mount, drill two 3/32” pilot holes 3” apart. Insert two #6 sheet metal screws and leave heads protruding 1/8” from surface. Place the
PowerSquid over screw heads and lower the PowerSquid onto the screws.
Electrical Rating: 120V, 15Amps, 1800 Watts
Maximum Energy Dissipation: 1080 JOULES
Maximum Spike Current: 72,000 AMPS
UL-1449 3rd. Edition
Clamp Rating: H-N 400V, H-G 400V, N-G 400V
Response Time: Instantaneous (Less than 1 Nanosecond)
Circuit Breaker: 15 AMPS (Resettable)
Protection Working Indicator: Red LED
Ground Power Indicator: Green LED
EMI/RFI Noise Reduction: Up to 40dB from 150 KHz to 100 MHz
3 ft. Heavy Duty Grounded Power Cord
2-Way Wall Mountable
Rubber Feet Prevent Sliding
Drop Tested ABS Housing
Recessed Master Power Button Prevents Accidental Switching
POWER BUTTON WITH 15 AMP CIRCUIT BREAKER
To protect itself from damage, the PowerSquid will turn off if any of the devices that are plugged-in malfunction or if the total power drawn
exceeds 1800 Watts. Simply remove any damaged connected devices or those devices as needed to be under the 1800-Watt capacity.
Push the Power Button to reset the circuit breaker.
A lighted Green Power Indicator LED indicates that the wall outlet is providing power to the PowerSquid. If the Power LED is not lighted,
press the Power Button. If still no power is going to the PowerSquid, check if the power outlet is controlled by a light switch. Plug another
device into the wall outlet to determine if the wall outlet is working properly.
A lighted Green Grounded Indicator LED indicates that the wall outlet the PowerSquid is plugged into is grounded. While power is On
(Power indicator green LED is lighted), if the Ground LED is not lighted, remove the PowerSquid from the wall outlet as it is unsuitable for
use with the PowerSquid.
A lighted Red Protected Indicator LED indicates that the surge protection is active. While power is On (Power indicator green LED is
lighted), if Protected LED is not lighted, the PowerSquid surge protection has been disabled. Unplug and discontinue use of the
PowerSquid and contact Accell Customer Service.
Note: This product, like all surge protectors, has a limited life. Even under normal circumstances, and in the absence of defects, the
product’s life will end when the components providing surge protection exceed capacity and cease to provide protection from surges and
spikes. The PowerSquid will cease to conduct power through the unit once the MOV’s have reached capacity. In the event of an over-
voltage condition, the circuit breaker will trip, and the unit will not conduct electricity. The user can reset the circuit after the event to
restore surge protection. If the red led goes does goes out, the PowerSquid needs to be replaced.
WALL MOUNTABLE
Two-way wall mountable, the PowerSquid can easily mount to a wall to save space, to put out-of-sight or for improved accessibility. To
mount, drill two 3/32” pilot holes 3” apart. Insert two #6 sheet metal screws and leave heads protruding 1/8” from surface. Place the
PowerSquid over screw heads and lower the PowerSquid onto the screws.
ASSISTANCE
If you have questions regarding the PowerSquid or its product warranty, please check out our Web site at: www.accellcables.com.
Customer service can be reached by email at support@accellcables.com or by phone at 877-353-0772 (M-F 9am-5pm PST).
If you have questions regarding the PowerSquid or its product warranty, please check out our Web site at: www.accellcables.com.
Customer service can be reached by email at support@accellcables.com or by phone at 877-353-0772 (M-F 9am-5pm PST).