Hytera Communications Corporation Limited PD70XG-VHF User Manual

                                                                                                                                                                                                                     

Functions and Operations 

Adjust Power Level 

With this feature, you may switch power levels quickly. Generally, we recommend you to adopt low power 

for battery saving. However, if you cannot communicate with radios located at a distant place with low 

power, please select high power. 

Press the programmed Adjust Power Level key to switch between high power and low power (from low 

power to high power: a high-pitched tone sounds; from high power to low power: a low-pitched tone 

sounds).  

Scan  

This feature allows you to listen to communication activities on other channels so that you can keep a 

close track of your team members.   

Operation:   

1.  To enable the feature, press the programmed Scan key in standby mode (a high-pitched tone 

sounds); or 

Switch to a channel on which the feature “Auto Scan” is enabled via the programming software. 

2.  After the feature is enabled, your radio will scan according to the scan list set for the channel on 

which scanning starts. The scanning process is as follows:   

z

  During scanning, the LED flashes orange. 

z

  When activities are detected on a channel, the radio will stay on the channel to receive current 

activities, and the LED glows green. 

z

  If you don’t want to hear activities on the channel, press the programmed Nuisance Temporary 

 key to remove the channel from the scan list temporarily.   

z

  If you want to continue staying on the channel, press the programmed Monitor or Squelch Off 

key during scan stay. 

 

3.  To exit the scanning process, press the programmed Scan key again (a low-pitched tone sounds). 

 

 

17