OEM Controls Inc. ST570HVS User Manual

Confidential and Proprietary, Property of OEM Data Delivery a Division of OEM Controls Inc.|    1 

 

Overview of the ST-570 Hour Meter  

The ST-570 RFID hour meter is a lean, efficient device that captures and securely 
transmits equipment use information.  Most importantly, it is wireless, paperless, 
and “hands-free”. 
 
The unit’s interface consists of a user pushbutton and an indicator LED.   

 

  Installation Guidelines 

 

  Check machine frame voltage (e.g., positive ground or negative ground). 
  Always be aware of moving parts. Give adequate slack in wires. Zip-tie everything, never 

  Watch out for turbos and exhaust as they will burn or melt the wires. 
  When mounting trackers, watch out for compartments that open, especially bob cats or 
  other skid steers where the radiator assembly lifts up, so leave slack in wires to the Service 

  Know what you are drilling into BEFORE drilling (e.g., radiator, hydraulic tank, and fuse 

  Always yell “CLEAR” and wait for a response before starting machine (e.g., dozer tracks, 

  Never sit on tires, tracks, or moving parts, when starting a machine. 
  Lower all attachments to the ground BEFORE shutting down the motor (e.g., dozer blade, 

Write down the 

 located on the side of the 

tracker 

 that you are installing the unit on for 

documentation. This information must be reported back to the office for 
tracking purposes.