Intellinet 520409 User Manual
16-Port Fast Ethernet Rackmount Switch
19" Rackmount
Part No.:
Part No.:
520409
Add the connections you need without adding the clutter you don't.
The INTELLINET NETWORK SOLUTIONS 16-Port Rackmount Fast Ethernet Switch is a
high-performance 10/100 Mbps LAN switch with auto-sensing and auto-negotiation on every port.
The space-saving, cost-effective design allows you to connect up to 16 devices to your local area
network while only taking up one slot in your network rack or cabinet.
high-performance 10/100 Mbps LAN switch with auto-sensing and auto-negotiation on every port.
The space-saving, cost-effective design allows you to connect up to 16 devices to your local area
network while only taking up one slot in your network rack or cabinet.
Auto-Sensing
The 16-Port Rackmount Ethernet Switch automatically senses the speed of the attached device, and self-configures the port to connect
at 10 Mbps or 100 Mbps.
at 10 Mbps or 100 Mbps.
Auto-Negotiation
The 16-Port Rackmount Ethernet Switch will automatically operate at half of full duplex based on the attached device and application
being supported.
being supported.
Auto MDI/MDIX Crossover
Each port on the Rackmount Fast Ethernet Switch supports MDI/MDIX, eliminating the need for crossover cables or uplink ports.
Cost Effective
By supporting up to 16 ports in a single chassis, the 16-Port Fast Ethernet Rackmount Switch saves you money by eliminating the need
to purchase an additional switch in order to connect more devices to your growing network.
Features:
10/100 auto-sensing ports automatically detect optimal network speeds
Supports any combination of 10 Mbps or 100 Mbps network devices
All RJ45 ports with Auto-MDIX (auto uplink) support
Auto-detection of full/half duplex modes in all ports
Supports 802.3x flow control for full duplex mode and collision-based backpressure for half duplex
mode
Supports NWay auto-negotiation
Provides independent 256-entry forwarding table for multicast addresses
Non-blocking & non-head-of-line blocking full wire speed forwarding
Store and forward switching architecture
Supports up to 8192 MAC address entries
256 kBytes buffer memory
19" compact rigid metal case
Includes 19" rackmount brackets
Three-Year Warranty
Supports any combination of 10 Mbps or 100 Mbps network devices
All RJ45 ports with Auto-MDIX (auto uplink) support
Auto-detection of full/half duplex modes in all ports
Supports 802.3x flow control for full duplex mode and collision-based backpressure for half duplex
mode
Supports NWay auto-negotiation
Provides independent 256-entry forwarding table for multicast addresses
Non-blocking & non-head-of-line blocking full wire speed forwarding
Store and forward switching architecture
Supports up to 8192 MAC address entries
256 kBytes buffer memory
19" compact rigid metal case
Includes 19" rackmount brackets
Three-Year Warranty
Specifications:
Standards
» IEEE 802.3 (10Base-T Ethernet)
» IEEE 802.3u (100Base-TX Fast Ethernet)
» IEEE 802.3x (Flow Control and Backpressure)
» IEEE 802.3 (10Base-T Ethernet)
» IEEE 802.3u (100Base-TX Fast Ethernet)
» IEEE 802.3x (Flow Control and Backpressure)
General
» Media support:
» Media support:
For more information on INTELLINET products, consult your local dealer or visit www.intelllinet-network.com.
All names of products or services mentioned herein are trademarks or registered trademarks of their respective owners. Distribution and reproduction of this
document, and use and disclosure of the contents herein, are prohibited unless specifically authorized.