Recon Dynamics LLC B0-0003 User Manual
PROXBOX INSTALLATION GUIDE
© 2018 Recon Dynamics, LLC | v1.2
1
ProxBox Installation Guide
The ProxBox kit contains the following items needed to mount and install the Recon
Dynamics ProxBox: ProxBox, patch antenna, power cable, vibration mounting kit and
hardware and coax seal. After completing the installation be sure to visit
www.recondynamics.com
Dynamics ProxBox: ProxBox, patch antenna, power cable, vibration mounting kit and
hardware and coax seal. After completing the installation be sure to visit
www.recondynamics.com
to access your account and complete the setup. Based on
information Recon receives on your company contacts, users and structure an account will
be created for you to access. Appendix A includes pictures of sample installations for your
convenience.
be created for you to access. Appendix A includes pictures of sample installations for your
convenience.
PROCEDURE
While this procedure is written in the context of mounting the ProxBox onto a
vehicle, it also applies to mounting the ProxBox to any piece of equipment which can
supply constant 12 volt DC power to the box.
vehicle, it also applies to mounting the ProxBox to any piece of equipment which can
supply constant 12 volt DC power to the box.
PRE-INSTALLATION
Compare with the list of contents provided with the kit. If any discrepancies are
found, contact the Recon Dynamics customer service department.
found, contact the Recon Dynamics customer service department.
P
ROX
B
OX
• Inspect the truck prior to installing the ProxBox to determine the best location for
mounting the ProxBox and antenna.
• Document any information regarding the vehicle or equipment the ProxBox is being
installed on for input into the Recon system.
• Document the serial number of the ProxBox for input into the Recon system.
• Criteria for mounting a ProxBox:
• Criteria for mounting a ProxBox:
o
Mount the ProxBox on a surface large enough that all 4 mounting points can
be used.
o
Mount the ProxBox close enough to the front of a truck so the power cable
can be hooked up to the truck's main battery with the supplied cable length.
Extending the supplied power cord is acceptable to increase mounting
options.
Extending the supplied power cord is acceptable to increase mounting
options.
o
Mount the ProxBox such that no tools or equipment will damage it while they
are in use or being stored on the truck.
o
Mount the ProxBox as high as possible and as far away from any nearby
metal obstructions to minimize interference with the gray top.
o
See Appendix A for installation examples.