Essence Security International ltd. ES7000EG User Manual
Operation
EverGuard Control Panel
45
Partition – In Part Arm mode, indicates the number of the partition that
is armed
Communication Status – Communication mode in operation
NTS - no transmission status
CCS - continuous cycle status (default setting and after activation)
ITS - test mode, used by the technician during initial panel configuration,
modification, or upgrade
Note: The test mode remains in effect for only two hours. It will
automatically revert to its previous state if a new a state is not manually
selected or if an operative code is not sent.
automatically revert to its previous state if a new a state is not manually
selected or if an operative code is not sent.
Maintenance - status of the last software update
End Install – Complete = successful update
RF Update – Complete = successful update
Account – ES7000EG Control Panel ID number
Communications – Sets the desired Communication mode (See
Communication Status above)
Communication Status above)
NTS
CCS
ITS
Last Connection
Time – the time when the ESI-CMS was last connected to this particular
ES7000EG control panel
Date - the date when the ESI-CMS was last connected to this particular
ES7000EG control panel
Firmware
Main CPU – firmware version number of the main CPU
RF CPU – firmware version number of the RF CPU
Serial Num - ES7000EG Control Panel serial number
Real Time Clock
Time
Date
GSM Coverage – displays the quality in percentage of the cellular connection
Command
Arm/Part Arm/Disarm – Sets the Security operation mode on the
ES7000EG or ES7000EG Control Panel
Refresh – refreshes the data from the panel