Essence Security International ltd. ES800MGL User Manual
Installing WeR@Home™
WeR@Home™ Installation Guide
5
2. Installing WeR@Home
™
The WeR@Home
™
installation involves the deployment of the WeR@Home
™
hub and peripherals in
your home. This guide provides the deployment instructions for the hub and each device type.
Installing WeR@Home
Installing WeR@Home
™
includes the following:
Preparing the required equipment
Downloading the WeR@Home
™
app
Installing the WeR@Home
™
hub
Installing the peripheral devices
NOTE:
For information about the smoke alarm, refer to the ESUG05023
WeR@Home
™
Smoke Alarm User Guide.
2.1. Preparing the Required Equipment
Ensure you have the following before you install WeR@Home
™
:
AA alkaline batteries for the devices, as listed in Battery Quantities and Specifications on page
64. Remember to recycle your used batteries.
64. Remember to recycle your used batteries.
WARNING!
A new battery can explode if it is incorrectly installed.
If you are using cellular communications, a SIM card is either provided by your distributor or can
be purchased from your cellular service provider.
be purchased from your cellular service provider.
NOTE:
Contact your cellular service provider for APN support.
If you are using mounting-tape for installation, the tape is included. If you are using screws for
installation, refer to Appendix D Installing with Screws on page 52.
installation, refer to Appendix D Installing with Screws on page 52.