Essence Security International ltd. ES800MGL User Manual
Installing with Screws
WeR@Home™ Installation Guide
57
Figure 54: Siren Mounting Base with Screws
4. Mark the drilling locations for the punch-outs.
5. Drill the holes.
6. Insert the wall anchors if needed.
7. Place the base over the wall anchors.
8. Screw in the screws.
9. Slide the siren back into its mounting base.
Tag Reader
The tag reader mounting base has three holes for installation using screws.
To install the tag reader using screws:
1. Release the tag reader mounting base by lifting the tab and sliding the base in the tab’s direction.
Figure 55: Releasing the Tag Reader Mounting Base
2. Place and hold the base on the desired mounting location.