Essence Security International ltd. ES800MGL User Manual
Installing WeR@Home™
8
WeR@Home™ Installation Guide
Figure 4: Insert Backup Battery
5. If you are using your LAN, plug the LAN cable into the network port on the back of the hub and the
other end of the cable into the Internet router or modem. The LED on the front panel lights up
orange.
orange.
NOTE:
If both the SIM card and the LAN cable are installed, the LAN cable is the
external communications channel and the cellular channel is used for backup.
6. Return the back cover to the hub.
7. Wait for the hub front panel LED to switch from orange to green. This may take a few minutes.
2.3.3 Registering the Hub
To finish the hub installation, you need to register the hub.
To register the hub:
1. Tap
to open the WeR@Home
™
app. The Login screen appears.
2. Tap Register. The Registration screen appears.
3. Enter the hub’s 8-digit serial number, which can be found on the base of the hub, and tap Next.
The User Type screen appears.
4. Choose the type of user to add to the hub and enter user details as required:
If the user is not registered on another hub, tap New User. The New User screen appears.
Enter the user personal details, according to the table below, and tap NEXT.
Enter the user personal details, according to the table below, and tap NEXT.