Bretford Manufacturing Inc. H3635 User Manual
ELECTRICAL
• Avoid sparks. Avoid arcing. Always turn OFF the power to the
cart before plugging IN or OUT!
• Be sure each device is turned OFF before plugging into the cart.
• For Safety Purposes, make sure all electrical components do not
exceed the the maximum load rating of 12 amps.
• Risk of electrical shock. Do not plug the power cord into another
extension cord or relocatable power tap.
• The Power Module inside the cart are only for charging & syncing
Apple iPad devices, only.
• Do not unplug this product from the outlet when your hands are wet.
• Do not move the cart by pulling the power cord.
• Do not plug the unit in if the switch, receptacle(s) or power cord has
• Do not move the cart by pulling the power cord.
• Do not plug the unit in if the switch, receptacle(s) or power cord has
been damaged.
• Contact Bretford or a qualified electrician before attempting to make
any type of electrical repair or parts replacement.
• Before moving this cart from one room to the next, wrap the power
cord around the cord winder located on the side of the cart.
CAUTION
• Ventilation is critical for PowerSync carts to operate correctly,
providing the appropriate airflow so that heat-buildup is minimized
during the battery-charging / syncing process.
during the battery-charging / syncing process.
• Do Not block the ventilation holes on the cart. Proper air flow is
required for safe operation of equipment.
• Cart with iPad devices should be keep in a room with a maximum
temperature not to exceed 104° F or 40° C.
• Maximum weight of accessories on top of cabinet is 25 pounds. Do
not block ventilation holes when charging batteries.
• Avoid loading equipment in the cart in a uneven fashion. Uneven
weight distribution could cause a hazardous condition.
• This cart is not designed to be operated by a child or student. Adult
operation and supervision is recommended at all times.
• Move cart slowly.
• No TV/Monitor to be used on top of cart.
• Although this cart is designed to support the transport of equipment
• No TV/Monitor to be used on top of cart.
• Although this cart is designed to support the transport of equipment
within a school campus, it is not designed for outdoor use.
• Liquids should not be stored in, set on or placed inside this unit.
• Do not pull cart. Push the cart using the ergonomic handles.
• Engage locking casters when cart is not in transit.
• Use extra caution on ramps and thresholds.
• Do not pull cart. Push the cart using the ergonomic handles.
• Engage locking casters when cart is not in transit.
• Use extra caution on ramps and thresholds.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
1 This device may not cause harmful interference.
Operation is subject to the following two conditions:
1 This device may not cause harmful interference.
2 This device must accept any interference received, including
interference that may cause undesired operation.
Changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to
operate the equipment.
NOTE: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
responsible for compliance could void the user's authority to
operate the equipment.
NOTE: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not
harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on,
equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one or more
of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to
of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
11000 Seymour Avenue Franklin Park, IL 60131 USA 800 521 9614
bretford.com/apple
OPEN
30-pin Connector
Cables Pre-Installed
Cables Pre-Installed
hang directly in the slot &
minimize cable clutter
minimize cable clutter
12 Year Warranty
on the Cabinet
on the Cabinet
1 Year Warranty
on Electrical
on Electrical
Ships 100%
Assembled
Assembled
LED Lights
on the top and back
of the cart let you
know what is going
know what is going
on inside the cart
Directional
Locking Casters
Locking Casters
can be locked as a
rigid caster for easy
rigid caster for easy
rolling down the
hallway, unlocked to
swivel for easily getting
hallway, unlocked to
swivel for easily getting
into tight spaces
Security
Front doors 3-point
Front doors 3-point
locking system with
programmable
programmable
combination padlock
Ventilation
Channels allow
Channels allow
maximum air
flow in the cart
flow in the cart
Compact Design
Although this cart can store & power
up to 30 iPad devices, the exclusive
quiet-glide casters and compact size
quiet-glide casters and compact size
make it very easy to move around
Auxiliary Outlet
for Host computer
for Host computer
inside the top
grommet
grommet
One Power Cord
Exits the cart & plugs
Exits the cart & plugs
into the wall outlet
POWERSYNC CART FOR iPAD
H3635LL/A
Storage Tub
Inside for extra
Inside for extra
cables & connectors
CLOSED
Laser
Numbered
Slots
help identify the
Numbered
Slots
help identify the
devices & assist
in asset
management
in asset
management
.
Step 4
Store & Charge
iPad devices using the
PowerSync Cart
1. Insert each iPad device into a slot and attach the 30-pin
dock connector.
NOTE: the orange Bretford logo should face up on the same side
as iPad device screen.
as iPad device screen.
2. Plug in Power Cord from the right side of the cart.
3. Turn main Power Switch on back of cart to “ON” position.
3. Turn main Power Switch on back of cart to “ON” position.
NOTE: PowerSync Cart will charge up to 30 iPad devices
NOTE: For best results with new iPad devices, charge for about
4 hours or until the iPad device displays a charged battery.
NOTE: For best results with new iPad devices, charge for about
4 hours or until the iPad device displays a charged battery.
Please follow these instructions for
each iPad device
used
with your PowerSync Cart:
1. Connect each iPad, one at a time, to the Mac you will
be using with the PowerSync Cart.
2. If iTunes does not open automatically,
open iTunes
& select your iPad device.
3. If prompted, complete the naming and registration
process.
4. Select the Summary tab for your iPad device.
5. In the
5. In the
Options section:
Enable “Open iTunes when this iPad is attached”
(This
(This not only activates iTunes, but begins the
syncing process.)
Enable “Sync only checked songs & videos”
” (This
(This allows for greater control of synced media.)
Disable “Manually manage music & videos”
(Enabling
(Enabling this will require that you manually drag
media to this particular iPad.)
4. In the remaining tabs, select the media and playlists
you wish to sync with this iPad device.
5. Click the Sync or Apply button.
(The Sync button changes to Apply & Cancel buttons
when you make a change to the sync settings.)
Repeat these steps with each iPad device in your
collection
Configuring an iPad device for use with PowerSync Cart
NOTE: iPad devices will not charge and sync at the same time!
LED Charging Indicator Lights
LED Lights on TOP of Cart
3 lights - 1 for each section of 10 iPads - glow
amber when charging, turn green when charged
amber when charging, turn green when charged
LED Lights on BACK of Cart
1 light for each iPad, shown in sequence per the layout in the
cart for easy identification. Amber charging. Green charged.
cart for easy identification. Amber charging. Green charged.