Hangzhou Hamaton Tyre Valves Co. Ltd. HTS5A433 User Manual

Page of 2
 
 
 
User Manual   
1、Sensor Overview 
The sensors use a tire pressure monitoring system (TPMS), to form a system 
with the car's tire pressure receiving unit, you need to install the tire wheels (as 
shown). 
 
 
 
2. 
Instructions for use
 
In stationary mode, the pressure and acceleration are measured about every 30 
second and emission of RF frames occurs only if pressure variation, higher than a 
threshold, is detected (leakage detection).   
When the vehicle starts moving, the Tire Guard transmitter enters the driving 
mode. Then the wheel unit measures and transmits data every 60 seconds.   
If, during any measurement period in driving mode, the pressure leakage is 
detected (difference compared to the last transmitted pressure value), a alarm 
signal will occur taking in account the latest pressure value emitted as reference 
value. If the pressure continues changing, an additional transmission will be sent.   
3. Technical Description   
Carrier frequency: 433 MHz   
Number of channels: 1   
Method of frequency generation: PLL   
Type of modulation: ASK or FSK 
Rated Output Power: < 10 mW   
Antenna: External (Valve antenna)   
Voltage supply: Lithium battery 3V 
Voltage supply range : 2.1V up to 3.3V