DAMALL TECHNOLOGIES SAS D-2304 User Manual
D
AMALL
D-2304
P
AGE
|
25
Please note that with most SIP systems, outgoing calls cannot be made unless at
least one Dialling Rule is selected.
6.6.2 User Defined Rules
It is possible to define a set of rules to allow the IP Phone to recognise specific
numbers, regardless of the settings in 6.6.1. These rules are put into the Digital
Map Table.
numbers, regardless of the settings in 6.6.1. These rules are put into the Digital
Map Table.
End with ‘#’
Calls are placed after the # key is pressed. This is the
default setting for the device.
default setting for the device.
Fixed Length
Calls must be a set number of digits long. Calls are
placed once a set number of digits have been entered.
placed once a set number of digits have been entered.
Timeout
Calls are placed after a set delay has elapsed. This is a
measurement, in seconds, for how long the phone
waits after a number has been entered before placing a
call.
measurement, in seconds, for how long the phone
waits after a number has been entered before placing a
call.