PROAUDIO ELECTRONICS CO. LIMITED VHF-04HHM User Manual

Wireless Microphone

1. Unscrew the battery cover at the end of the microphone. Install the provided 

9 volt battery and then close the cover. Make sure to connect with the correct 
polarity.

2. Move power switch to ON position. Power LED indicator will flash once and 

then go off. This indicates correct operation. If power LED indicator lights 
red, this indicates the battery is Iow. Please replace new battery.

3. Move power switch to center to mute the microphone.
4. If the microphone is not going to be used for a long period of time, please 

take out the battery to prevent damage by battery leakage.

Quartz Controlled
179.0MHz
30ppm
FM
±75kHz
 >100dB
>60dB
80~20000Hz  at ±3

dB

≤0.5%
Dynamic Microphon

e

50μs
Built-in housing
<10mW
>40dB
One 9V Battery
<250mW
30m(line and sight a

rea)

-20℃~50℃

Oscillation Mode: 
Frequency :
Frequency Stability:   
Modulation Mode:          
Maximum Deviation:          
Audio Dynamic Range:      
S/N:                                     
Frequency Response:       
T.H.D:                              

   

Mike Capsule:             
Pre-emphasis:              
Antenna:                        
RF Output:                    
Spurious Emission:       
Power Supply:              
Power Dissipation: 
Operating Range:          
Operation Temperature:       

Model Name:VHF-04HHM
FCC ID:ZRIVHF-04HHM