Landis+Gyr Technology Inc. ER6R1S4 User Manual

Draft

Landis+Gyr

Chapter 4 - Deploying Endpoints 

User Guide

98-1723 Rev AB

27

If the endpoint configuration sent in with the Init Push is not recognized, Command Center 
will transition it to Configure. 

A Reconfiguration command will be sent from Command Center to set the endpoint 
configuration group. (If the meter is ZigBee enabled, a HAN Initialization command will be 
sent, also setting it to Configure.)

A response to the reconfiguration command (or HAN Initialization) will transition the 
endpoint to Normal in Command Center.

The Dashboard provides notification of system events and the status of system processes in a timely 
manner without user interaction. The dashboard should be monitored by the administrator on a regu-
lar basis, throughout the day.

Click Network > AMI Dashboard. The dashboard will open.

The dashboard will show filtering options depending on the technologies that the utility is licensed 
for. Selecting the filtering tabs will display just the devices associated with that technology.

ALL. Select All to display every endpoint in the system.

RF. Select RF to display only RF endpoints in the system.

Cellular. Select Cellular to display only Cellular endpoints in the system.