Xerox 003R06709 User Manual
Media Product Data Sheets
Xerox Wide Format Supplies Applications Guide
Version 2.0; April 2005
32
Xerox Matte Presentation Paper 160 g/m
2
Product Description
High-white, heavyweight, coated presentation paper designed for CAD/GIS and low coverage color applications.
Can be printed to give good image density and gamut with lower ink limits and therefore excellent ink economy.
The heavyweight base gives this paper good stiffness and bulk. Dimensional stability makes this paper suitable for
multi-panel display. This paper is not designed for heavy ink loading and may cockle if ink limits are exceeded.
The heavyweight base gives this paper good stiffness and bulk. Dimensional stability makes this paper suitable for
multi-panel display. This paper is not designed for heavy ink loading and may cockle if ink limits are exceeded.
Dries quickly and is suitable for both dye and pigment inks.
Applications
General-purpose CAD/GIS, low coverage posters and presentation graphics.
Physical Properties
Product Code
Width
Length
m
2
023R02089
1524 mm
60"
31 m
100 ft
47
023R02090
1270 mm
50"
31 m
100 ft
39
023R02091
1067 mm
42"
31 m
100 ft
33
023R02092
914 mm
36"
31 m
100 ft
28
023R02093
610 mm
24"
31 m
100 ft
19
Base Weight
160 g/m
2
Caliper (microns)
198
Whiteness (CIE)
132
Opacity
96%
Compatibility
Critical Operating Instructions
• Lower ink limits should achieve good color density and gamut and are required for non-CAD/GIS applications.
• Allow time for ink to dry before laminating. Can use thermal or pressure laminates.
• Lamination is recommended for prints requiring satin, matte, high gloss or other finishes and/or prints requiring
UV protection or greater general durability if they may be subject to moisture or handling. This media is suitable
for pressure (cold) or thermal (hot-melt) laminates. Protect from moisture and/or abrasion with at least a
75 micron laminate on front side or both sides. Encapsulate with a 1/4 inch (6 mm) sealed edge for outdoor use.
for pressure (cold) or thermal (hot-melt) laminates. Protect from moisture and/or abrasion with at least a
75 micron laminate on front side or both sides. Encapsulate with a 1/4 inch (6 mm) sealed edge for outdoor use.
Printer
Ink Type
Xerox 8142/8160
Dye
HP 2XXX/3XXX/5XXX
Dye/Pigment
Epson Stylus Pro 7000/9000/7500/9500/10000
Dye/Pigment
Epson Stylus Pro 7600/9600/10600
Dye/Ultrachrome
®
Encad Novajet
GA/GS/GS+/GX/GO