Xerox 003R06709 User Manual

Application Ideas and Procedures

Xerox Wide Format Supplies Applications Guide 

Version 2.0; April 2005

80

• Do not put too much ink on the media or images may rub off easily, especially in heavy coverage areas. Use the correct color

curve. Color enhancement to the digital file (such as altering single-color blacks to 4-color blacks, etc.) may help to increase
intensity of colors before RIP processing.

• A double stitched hem with a maximum of 5 stitches per inch is recommended. Unlaminated images are easily scratched and

must be stitched hem side up so that the sewing machine foot comes in contact with the backside of the print.

• FINISH edges using normal procedures for scrim vinyl (grommets, stitching, tape, pockets, etc.). Standard banner tape 

purchased from a banner supply store is appropriate. 

• PRINTS are easily damaged when handled improperly. If unlaminated, avoid contact with laser printer or photocopier output.

Use a slipsheet when rolling several posters together. Use low tack tape to secure the roll. Do not use rubber bands around a
print that is not laminated. 

• Properly printed, this material can withstand normal handling immediately after printing. This fabric is coated across a porous

surface, not smooth as in papers or vinyl. Some of the coating layer tends to “sit” on top of the peaks and valleys 
of the weave; therefore, it may exhibit a tendency to rub off if handled improperly. Try wearing cotton gloves to minimize image
offset.

• Place grommets lengthwise along the hemline of the banner so that the grommet is through two layers, and in the corners of

the banner through 4 layers. The folds can be taped with standard banner tape or sewn.

The high strength and scope of finishing options for fabrics make them ideal for use in banner, flag, drapery, and 
paneled backdrop applications, also for stretching over a wood frame for display of fine art reproductions. 

Fire retardant properties are a consideration when a graphic is to be displayed in environments with the most stringent
regulations, such as government facilities, museums, art galleries, hotels, convention centers and schools, etc.

Trade shows (table fronts, overhead), hanging displays, hallways and corridors, museums and art galleries, retail sales
and shopping centers, theatre lobbies or backdrops, restaurants, showrooms, events, sport arenas.