Moxa VPort 354-T VPORT 354-T Leaflet
Product codes
VPORT 354-T
1
w w w. m o x a . c o m
i n f o @ m o x a . c o m
IP Surveillance
Full motion, 4-channel MJPEG/MPEG4 industrial video encoders
VPort 354 Series
The VPort 354 is a high performance, 4-channel industrial video
encoder that provides up to 4CIF full frame rate performance (NTSC:
704 x 480 @ 30 FPS; PAL: 704 x 576 @ 25 FPS) for each channel, and
supports a dual MJPEG/MPEG4 algorithm, making it especially well-
suited for use with distributed surveillance systems in critical industrial
applications. In addition to the rugged-design features, the Modbus/
encoder that provides up to 4CIF full frame rate performance (NTSC:
704 x 480 @ 30 FPS; PAL: 704 x 576 @ 25 FPS) for each channel, and
supports a dual MJPEG/MPEG4 algorithm, making it especially well-
suited for use with distributed surveillance systems in critical industrial
applications. In addition to the rugged-design features, the Modbus/
Industrial design with -30 to 70°C operating temperature
›
and fiber optic Ethernet port
2 Ethernet ports for cascade and port redundancy
›
SD card slot for local storage capability
›
Modbus/TCP supported for easy communication with
›
SCADA software
Video stream up to 120 frames/sec at 4CIF (704 x 480)
›
resolution
TCP and serial-to-Ethernet connectivity make the VPort 354 more
suitable for industrial applications. The two built-in Ethernet ports can
be cascaded as a daisy-chain or used for port redundancy, making
network communication more safe and reliable. To prevent video loss
when the network is down, the VPort 354 can automatically record
video on an SD card, and once the network is back up, the recorded
video can be downloaded via FTP access.
suitable for industrial applications. The two built-in Ethernet ports can
be cascaded as a daisy-chain or used for port redundancy, making
network communication more safe and reliable. To prevent video loss
when the network is down, the VPort 354 can automatically record
video on an SD card, and once the network is back up, the recorded
video can be downloaded via FTP access.
Specifications
Introduction
Video
Video Compression: MJPEG or MPEG4 (ISO/IEC 14496-2)
Video Inputs: 4, BNC connector (1.0 Vpp, 75 ohms)
Video Streams: Dual streams (one for MJPEG, the other for MPEG4)
at the same video resolution (note that MJPEG only has one quality
setting)
NTSC/PAL: Auto-sensing or manual
Video Resolution and FPS (frames per second):
Video Inputs: 4, BNC connector (1.0 Vpp, 75 ohms)
Video Streams: Dual streams (one for MJPEG, the other for MPEG4)
at the same video resolution (note that MJPEG only has one quality
setting)
NTSC/PAL: Auto-sensing or manual
Video Resolution and FPS (frames per second):
NTSC
PAL
Size
Max. FPS
Size
Max. FPS
QCIF
176 x 112
30
176 x 144
25
CIF
352 x 240
30
352 x 288
25
2CIF
704 x 240
30
704 x 288
25
4CIF
704 x 480
30
704 x 576
25
Video Viewing:
• Adjustable image size and quality
• Timestamp and text overlay
Video Output: Via Ethernet port
• Adjustable image size and quality
• Timestamp and text overlay
Video Output: Via Ethernet port
Audio
Audio Inputs: 1 Line-in or MIC-in with RCA connector
Audio Outputs: 1 Line-out with RCA connector
Audio Outputs: 1 Line-out with RCA connector
Network
Protocols: TCP, UDP, HTTP, SMTP, FTP, Telnet, NTP, DNS, DHCP,
UPnP, RTP, RTSP, ICMP, IGMPv3, QoS, SNMPv1/v2c/v3, DDNS
Ethernet: 2 10/100BaseT(X) auto negotiating RJ45 ports, or 2
100BaseFX fiber ports (single/multi-mode, SC connector)
UPnP, RTP, RTSP, ICMP, IGMPv3, QoS, SNMPv1/v2c/v3, DDNS
Ethernet: 2 10/100BaseT(X) auto negotiating RJ45 ports, or 2
100BaseFX fiber ports (single/multi-mode, SC connector)
Serial Port
PTZ Ports: 1, RS-232/422/485 port (terminal block connector), max.
speed of 115.2 Kbps, with 15 KV ESD protection
speed of 115.2 Kbps, with 15 KV ESD protection
COM Ports: 1, RS-232/422/485 (DB9 female connector), max. speed
of 115.2 Kbps, with 15 KV ESD protection
Console Port: 1 RS-232 RJ45 port
of 115.2 Kbps, with 15 KV ESD protection
Console Port: 1 RS-232 RJ45 port
GPIO
Digital Inputs: 4, max. 8 mA
High: +13 to +30 V; Low: -30 to +3 V
Relay Outputs: 2, max. 24 VDC @ 1 A
High: +13 to +30 V; Low: -30 to +3 V
Relay Outputs: 2, max. 24 VDC @ 1 A
LED Indicators
PWR1: Power 1
PWR2: Power 2
FAULT: Can be configured to correspond to system alarm, power
failure, or disconnected network
V1, V2, V3, V4: Video input signal activity
PWR2: Power 2
FAULT: Can be configured to correspond to system alarm, power
failure, or disconnected network
V1, V2, V3, V4: Video input signal activity
Local Storage
SD Socket: Standard SD socket, SDHC, with SD LED indicator
Power Requirements
Input Voltage: 2 12/24 VDC or 24 VAC inputs for redundancy
Power Consumption: Approx. 12 W
Power Consumption: Approx. 12 W
Physical Characteristics
Housing: Metal, IP30 protection
Dimensions: 80.2 x 135 x 105 mm (3.16 x 5.31 x 4.13 in)
Weight: 1200 g
Installation: DIN-Rail mounting, wall mounting (with optional kit)
Dimensions: 80.2 x 135 x 105 mm (3.16 x 5.31 x 4.13 in)
Weight: 1200 g
Installation: DIN-Rail mounting, wall mounting (with optional kit)
Alarms
Video Motion Detection: Includes sensitivity tuning (Pending)
Video Loss: Video loss alarm
Scheduling: Daily repeat timing schedule
Imaging: JPEG snapshots for pre/trigger/post alarm images
Email/FTP Messaging: Automatic transfer of stored images via email
or FTP with event-triggered actions
Custom Alarms: HTTP event servers and CGI events for setting
customized alarm actions
Video Loss: Video loss alarm
Scheduling: Daily repeat timing schedule
Imaging: JPEG snapshots for pre/trigger/post alarm images
Email/FTP Messaging: Automatic transfer of stored images via email
or FTP with event-triggered actions
Custom Alarms: HTTP event servers and CGI events for setting
customized alarm actions