Navico Inc. HS35 User Manual

Simrad - RS35 Operation Instructions

Simrad - RS35 Operation Instructions

35

34

The COM PORT must be configured correctly before use. The radio can be added to a group 
of instruments using NMEA protocol.

RADIO SETUP

 WATCH MODE

▲

 WX ALERT

►COM PORT

 GPS SOURCE

▼

NMEA

CHECK SUM

►ON

 OFF

1. 

Select RADIO SETUP then COM PORT.

2. 

Select the desired setting then press ENT.
CHECK SUM ON (on) is the usual setting.
The COM PORT uses 4800 baud rate and can receive the following GPS data sentences: 
RMC, GGA, GLL, GNS. Additionally, the radio will output the following NMEA DSC data: 
DSC (for DSC call), DSE (for enhanced position).

This radio can use either NMEA 0183 or NMEA 2000 protocol to receive GPS data from a 
compatible GPS unit. 

Note: NMEA 2000 SOURCE options will appear (up to 4 sources showing the actual source 
name) only if an NMEA 2000 network is connected to the radio and is operational.

 

RADIO SETUP

 WX ALERT  ▲

 COM PORT

►GPS SOURCE

 FAV CH SETU

GPS SOURCE

►NMEA0183

 LGC3000

 LCX113CHD

1. 

Select RADIO SETUP then GPS SOURCE. (If there is only one NMEA protocol available on 

your vessel, only that will be shown).

2. 

Select the desired NMEA source then press ENT.

The Wx key can be programmed to a weather channel of your choice so that you have quick 
access to that channel.

1. Select RADIO SETUP then FAV CH SETU.

2. Rotate the CH knob or press UP/DOWN key to select a channel that you want to save it as 
the WX favorite channel, then press ENT to save with WX icon lighting to indicate. 

RADIO SETUP

 INT SPEAKE

▲

 WATCH MODE

►WX ALERT

 COM PORT  

▼

WX ALERT 

 TONE ALERT

 SAME ALERT

►SAME CODE

 

SAME CODE

►NEW CODE

INPUT SAME

CODE

SAME CODE

012011

►STORE

 CANCEL

SAME CODE

►NEW CODE 

 0122003

 

1. 

Select RADIO SETUP then WX ALERT. 

2. 

Select SAME CODE. If you have already entered any SAME codes, they are listed on the 

LCD. 

3. 

Select NEW CODE. Enter the new SAME code along the dashed line, one number at a 
time. Press ENT to confirm each correct entry and to move to the next digit. 
If you make an error, press – until < appears, then press ENT to backup and correct the 
entry.

4. 

Press ENT to store the SAME code.

5. 

Repeat if necessary to enter a maximum of 10 SAME codes.

You must select a SAME code for your geographic working area that you have previously 
entered into the radio in order to receive SAME weather alerts:

RADIO SETUP

 INT SPEAKE

▲

 WATCH MODE

►WX ALERT

 COM PORT  

▼

WX ALERT

 TONE ALERT

 SAME ALERT

►SAME CODE

SAME CODE

 NEW CODE

►012203

 017093

012203

 EDIT

 DELETE CODE

►SELECT CODE

SELECT CODE

012203

►YES

 NO

1. 

 Select RADIO SETUP then WX ALERT.  

2. 

Select SAME CODE. If you have already entered any SAME codes, they are listed on the 

LCD.

3. 

Select the SAME# for your geographic area (0122003 in the above example) and press ENT.

4. 

 Choose SELECT CODE. Then select YES.