Navico Inc. HS35 User Manual
6-4 GPS redirection (GPS REDIR)
GPS redirection option set to output the GPS information to the chartplotter eliminating the
need for an additional multiplexer.
If “yes” is selected, the string $RMC will be redirected to the chartplotter once it is received.
need for an additional multiplexer.
If “yes” is selected, the string $RMC will be redirected to the chartplotter once it is received.
Note: The REDIR function will only redirect RMC and GLL messages from NMEA 0183 input
port to the AIS output port.
port to the AIS output port.
AIS SETUP
►GPS REDIR
CPA ALARM
CPA
TCPA
GPS REDIR
►NO
YES
6-5 Closest point of approach alarm (CPA ALARM)
Enables the CPA alarm. If set to OFF, there will be no T/CPA alarms regardless of the settings.
AIS SETUP
GPS REDIR
►CPA ALARM
CPA
TCPA
CPA ALARM
►ON
OFF
6-6 Closest point of approach settings (CPA)
CPA is the minimum distance between you and a target vessel based on the current speed
and course. You can set the minimum distance for CPA alarm to sound (1 NM to 30 NM).
Rotate the dial to set the CPA distance in 1 NM increments. Press ENT when done.
and course. You can set the minimum distance for CPA alarm to sound (1 NM to 30 NM).
Rotate the dial to set the CPA distance in 1 NM increments. Press ENT when done.
AIS SETUP
GPS REDIR
CPA ALARM
►CPA
TCPA
CPA
►01NM
6-7 Time to closest point of approach (TCPA)
TCPA is the minimum time of intercept between you and a target vessel based on the current
speed and course. Set the minimum time for the TCPA alarm to sound (5 Min to 30 Min).
Rotate the dial to set the TCPA time in 30 sec increments. Press ENT when done.
speed and course. Set the minimum time for the TCPA alarm to sound (5 Min to 30 Min).
Rotate the dial to set the TCPA time in 30 sec increments. Press ENT when done.
AIS SETUP
GPS REDIR
CPA ALARM
CPA
►TCPA
TCPA
►05:00Min
Section 7 - Wireless handset setup menu (HS SETTING)
Hold down CALL/MENU key for about 1 second to access the following HS SETTING options.
The following menu options are explained in this section.
The following menu options are explained in this section.
HS SETTING
SUBSCRIBE
Section 7-1
REGISTERED HS
Section 7-2
See sections 1-3 and 1-4 if you want to know how to move around the menu and enter, save
and change data.
and change data.
7-1 Register a wireless handset (SUBSCRIBE)
Before a HS35 wireless handset can be used with the RS35 radio, it must be registered (paired)
with the radio through the subscription process.
with the radio through the subscription process.
HS SETTING
►SUBSCRIBE
REGISTERD HS
SUBSCRIBE
►YES
NO
SUBSCRIBE
WAITING
EXIT-
>QUIT
SUBSCRIBE
HS SUBSCRIBE
SUCCESSFUL!
EXIT-
>QUIT
1.
Ensure the HS35 that you want to subscribe is charged and turned OFF.
Note: If you have another HS35 that is already subscribed to the RS35, ensure it remains off
during this proceedure.
during this proceedure.
On the RS35 base station radio:
2.
2.
Select HS SETTING, then SUBSCRIBE.
3.
Select YES. The radio will display WAITING.
On the HS35 wireless handset:
4.
4.
Turn ON the HS35 that you want to subscribe to the RS35, the display will show
SEARCHING.
5.
Press SCAN key until the display shows REGISTER.
6.
The display will soon show CONNECTING, and then the HS35 will be paired to the RS35.
7-2 Delete a registered wireless handset (REGISTERED HS)
1.
To delete an already registered handset, select REGISTERED HS
2.
Select the handset you wish to remove and press ENT and then YES.
HS SETTING
SUBSCRIBE
►REGISTERD HS
REGISTERED HS
►CLEAR HS1
CLEAR HS2
CLEAR HS1
►YES
NO
Simrad - RS35 Operation Instructions
Simrad - RS35 Operation Instructions
45
44