Navico Auckland Limited LVR880US User Manual
8
•
your latitude (40°30.5223N) and longitude (120°23.1231E) and UTC time in 12 hour format
(12:15pm).
•
the name of the destination waypoint (FISHY), its bearing (138°), your distance in nautical miles,
mile, or kilometers (depending on your choice of units), and any cross track error (XTE) are
shown.
shown.
1.3 Beep tones & call alerts
Error
3 cycles of 3 beeps
Acknowledge
1 long beep
Alarm
6 beeps followed by a 2 second pause (cycle is repeated for 2
minutes or until any key is pressed)
minutes or until any key is pressed)
LL position call alert
??
WX alert / SAME alert
Ear-catching multi-tone sequence
ROUTINE call alert
Friendly two-tone ring tone (press any key to cancel)
URGENCY call alert
6 beeps followed by a 2 second pause (cycle is repeated for 2
minutes or until any key is pressed)
minutes or until any key is pressed)
SAFETY call alert
??
DISTRESS call alert
6 beeps followed by a 2 second pause (cycle is repeated for 2
minutes or until any key is pressed)
minutes or until any key is pressed)
1.4 How to put the radio into MENU mode
You can customize many settings on the LVR-880 to suit your own preferences and enter and store
alphanumeric data (such as a buddy name), but you cannot do this while the radio is operational, you
must put the radio into MENU mode first.
1. Hold
alphanumeric data (such as a buddy name), but you cannot do this while the radio is operational, you
must put the radio into MENU mode first.
1. Hold
down CALL MENU for about 3 seconds to put the radio in MENU mode.
Note that only three menu items can be displayed at any one time on the LCD.
2. Press EXIT or PTT any time to quit MENU mode and return to operational mode.
1.5 How to Display and Navigate Menus
Hold down CALL MENU for about 3 seconds to put the radio in MENU mode.
To navigate through a menu:
1. Press + or – on the microphone OR turn the Channel Select knob on the base station to scroll up
To navigate through a menu:
1. Press + or – on the microphone OR turn the Channel Select knob on the base station to scroll up
or down through the menu until the cursor is positioned at the desired option.
2. Press ENT (the center of the Channel Select knob) to display that option.
1.6 How to Enter Alphanumeric Data
1. Hold down CALL MENU for about 3 seconds to put the radio in MENU mode.
2. For example, select BUDDY LIST then press ENT. Press ENT again for a new Buddy and enter
2. For example, select BUDDY LIST then press ENT. Press ENT again for a new Buddy and enter
the alphanumeric name.
3. Press + or – on the microphone OR turn the Channel Select knob to step through alphanumeric
characters one at a time.
4. Press ENT (the center of the Channel Select knob) to confirm your choice or setting.
5. If you make an error, press – until < is displayed, then push the center of the Channel Select knob
5. If you make an error, press – until < is displayed, then push the center of the Channel Select knob
to backup.