Amigo Technology Inc. BRC76N User Manual

 

 

            User Manual v1.0.0 

94

A:  The Wireless Router processes the data passing through it, so it is not transparent. 

Use the Special Application feature to allow the use of Internet applications which do 
not function correctly. If this does solve the problem, you can use the DMZ function. 
This should work with almost every application, but: 

z

 

It is a security risk, since the firewall is disabled. 

z

 

Only one (1) PC can use this feature. 
 

A:  Check the following: 

z

  The Wireless Router is properly installed, LAN connections are OK, and it is 

powered ON. 

z

  Make sure that your PC and the Wireless Router are on the same network 

segment. 

z

 

If your PC is set to “Obtain an IP Address automatically” (DHCP client), restart it.   

z

  If your PC uses a Fixed (Static) IP address, make sure that it is using an IP 

Address within the range 192.168.1.129 to 192.168.1.253 and thus compatible 
with the Wireless Router’s default IP Address of 192.168.1.254. Also, the 
Network Mask should be set to 255.255.255.0 to match the Wireless Router. In 
Windows, you can check these settings by using Control Panel ~ Network to 
check the Properties for the TCP/IP protocol. 
 

A:  The default WEP of WinXP is Authentication Open System - WEP, but the WEP of 

SAPIDO BRC76N is only for Shared Key - WEP, it caused both sides couldn’t 
communicate. Please select the WEP of WinXP from Authentication Open System to 

, and then the WEP wireless interface between WinXP and 

SAPIDO BRC76N would be communicated. 

A:  The Router will support to 253 IP addresses with NAT mode.