DXG Technology RWD01001 User Manual

MODE/SLEEP

SET

Modifications not approved by the party responsible for compliance 
could void user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits 
for Class B digital device, pursuant to part 15 of the FCC Rules. These 
limits are designed to provide reasonable protection against harmful 
interference in a residential installation. This equipment generates and 
can radiate radio frequency energy and, if not installed and used in 
accordance with the instructions, may cause harmful interference to 
radio or television reception, which can be determined by turning the 
equipment on and off.

This device complies with Part 15 of the FCC Rules. Operation is subject 
to the following two conditions: (1) This device may not cause harmful 
interference, and (2) this device must accept any interference received, 
including interference that may cause undesired operation.

FCC Caution: Any changes or modifications not expressly approved by 
the party responsible for compliance could void the user's authority to 
operate this equipment.

This transmitter must not be co-located or operating in conjunction 
with any other antenna or transmitter.

The user is encouraged to try to correct the interference by one or 
more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment into an outlet on a circuit different from that 

to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

Quick Start Guide

SET button

PHOTO button

Charging port

button

When the battery power is running low, do the following to charge the 
battery:

1.  Open the charging port cover.

2.  Connect one end of the Pogo cable to 

the charging port of your watch. 

3.  Connect the end of 

the Pogo cable to 
the USB port of 
a computer or 
AC adapter to 
charge battery. 

LEFT button

VIDEO button

RIGHT button

In this mode,  this watch can be used as a clock, stopwatch, countdown 
clock, and alarm clock.

1.  Press and hold the SET button to enter the setting mode. 

2.  Press the RIGHT button repeatedly to 

select the field that you want to adjust. 

3.  Use the VIDEO or PHOTO button to 

adjust the value or set time format or the 
color of the LED clock display. 

4.  Repeat steps 2-3 to adjust other fields. 

5.  Press the SET button to save your changes. 

1.  Press the LEFT button repeatedly to switch to 

Stopwatch mode. 

2.  Press the VIDEO button to start the timer. 

3.  To record a lap while the timer is running, 

press the RIGHT button. It displays the last 
lap time.
•  Repeat this step to create a new lap.  You can 

record up to 12 laps.

4.  To stop the timer, press the VIDEO button. 

5.  To reset the timer, press the SET button. 

1.  Press the LEFT button repeatedly to switch to Countdown Clock 

mode. 

2.  To start the countdown, press the VIDEO 

button.  

3.  To pause the countdown, press the VIDEO 

button.  

•   To resume, press the VIDEO button 

again.  

•   To reset the countdown, press the SET button. 

In this mode,  it allows to pair with a camera, set auto power off,  
enable/disable sound, and adjust the brightness setting.

1.  On your camera, press the Mode button 

repeatedly to change to SET mode.

2.  Press the Shutter button to enter SET mode.

3.  Press the Mode button to highlight MORE. Then press the Shutter 

button to enter the MORE menu. 

4.  Press the Mode button to highlight BINDING.

5.  Press the Shutter button to enter the BINDING submenu. The 

camera RF antenna is enabled and ready for pairing.

6.  On your RC watch, press the MODE button 

to switch to Preview mode.  
Then press and hold the SET button to 
enter to SET mode.

7.  Use the LEFT or RIGHT button to 

select Pairing and press the VIDEO button 
to enter Pairing menu. 

8.  Use the LEFT or RIGHT button to select the 

preview window that you want to pair with 
your camera and press the VIDEO button 
to start pairing.

9.  When pairing is complete, press the SET 

button to return to SET mode. Then press 
the SET button to switch to Preview mode.

10. Repeat Step 7~9 to add more cameras. You can pair up to 6 cameras.

1.  Press the RIGHT button repeatedly to switch 

to Alarm Clock mode. 

2.  To activate an alarm, press the VIDEO button 

to select ON.

To set the countdown time, do the following:

a.  Press and hold the SET button. Then 

press the RIGHT button repeatedly to 
select the field that you want to adjust.

b.  Use the VIDEO or PHOTO button to 

adjust the value.

c.  Press the SET button to confirm.

To set the alarm time, do the following:

a.  Press and hold the SET button. Then 

press the RIGHT button repeatedly to 
select the field that you want to adjust.

b.  Use the VIDEO or PHOTO button to 

adjust the value.

c.  Press the SET button to confirm.

To unpair or remove the paired camera, do the following:

a.  In SET mode, use the LEFT or RIGHT 

button to select Pairing and press the 
VIDEO button to enter Pairing menu.

b.  Use the LEFT or RIGHT button to 

select the assigned preview window 
that you want to unpair.

c.  Press the VIDEO button to confirm.

1.  Press the MODE button to switch to Preview mode.  

Then press and hold the SET button to enter to SET mode.

2.  Use the LEFT or RIGHT button to select 

Auto off and press the VIDEO button to 
enter Auto Power Off menu. 

3.  Use the LEFT or RIGHT button to select 

the desired setting and press the VIDEO 
button to confirm.

1.  Press the MODE button to switch to Preview mode.  

Then press and hold the SET button to enter to SET mode.

2.  Use the LEFT or RIGHT button to select 

Sound and press the VIDEO button to enter 
Sound menu. 

3.  Use the LEFT or RIGHT button to enable/

disable sound and press the VIDEO button 
to confirm.

1.  Press the MODE button to switch to Preview mode.  

Then press and hold the SET button to enter to SET mode.

2.  Use the LEFT or RIGHT button to select 

Bright and press the VIDEO button to enter 
Brightness menu. 

3.  Use the LEFT or RIGHT button to select the 

brightness level and press the VIDEO button 
to confirm.

2

3

4

5

6

2

3

4

5

6

Remote control

 

 

Living View

 

 

Basic time function: Time, Stopwatch ,Timer, Alarm 

Working Range  3m
RF Module 

2.4GHz

IO Terminals 

PoGo pin USB

Status OLED 

1.29”, 128.96 dot

Power Source 

Polymer Battery 370mAh, 3.7V dc

Stream Format  Motion JPEG 128*96 pixel, 8fps
Video Aspect  

4:3

Power Saving 

Auto Sleeping in 5/10/30/60s/never

Charging Time  Approx. 2 hours

Battery Life 

Living living view continuously: 1.5 hours

 

 

Time without sleeping: 6 hours

 

 

Standby time in sleeping mode: up to 6 months

A black screen 
appears on the 
screen and all 
buttons are inactive.

The screen appears 
unusually and all 
buttons are inactive. 

The battery is running 
out.

The watch is shutting 
down.

The micro SD card is 
not inserted.

The battery is running 
out.

Connect pogo cable 
and the battery will 
start charging after 10 
seconds.

Connect the end of the 
Pogo cable to the USB 
port of a computer. 
After 10 seconds, the 
watch will restart.

Insert a micro SD card 
into camera card slot.
(Note: If you use 
internal memory to 
record video, the live 
view will disappear 
when you start 
recording.) 

Connect the pogo 
cable to charge battery.

When the devices are paired,  the live view appears on the screen and 
you can use this watch as a remote control to record videos or capture 
photos. 
1.  Press the MODE button to switch to Preview mode.  The live view  

appears on the screen.

2.  Do the following:

•  To record videos:

Press the VIDEO button to start recording. 
Press the VIDEO button again to stop video 
recording.  

•  To capture photos:

Press the PHOTO button. 

(orange) - card full
(blue) - recording
(gray)- standby (already 
connected to camera)
(black)- disconnected

Video

Photo

Burst

Time Lapse @ video 

Time Lapse @ photo

Self Timer 

Looping

Set up/Wi-Fi…

Note: With PIV (Photo In Video) feature, you can take a photo when you 
are recording a video.

Video

Video

Video

Start/Stop 

Start/Stop

Video

Looping start/stop 

Video

Photo
Note: “PIV” is available when 
camera is recording.

Photo

Burst

Photo
Note: PIV is available when 
camera is processing Time 
Lapse @video.

Photo

Self Timer

N/A

Photo