NETSCOUT Systems Inc. A520X User Manual
16
Chapter 3: Installing A5205 Sensor
AirMagnet A5205 Sensor User Guide
Make sure that the four metal knobs on each corner of the A5031
Mounting Bracket are aligned with and set inside the holes on the four
corners of the A5205 Sensor’s bottom cover.
4)
Gently slide the Sensor towards the Locking Plate until it is fully
engaged.
5)
Secure the Sensor with padlock.
Powering Up A5205 Sensors
Customers deploying AirMagnet Enterprise can power their
AirMagnet sensors using a standard Ethernet cable, thus avoiding
the need to run the standard electrical wiring to each and every
individual sensor. AirMagnet offers two PoE options, and customers
can typically make their own choice based on the quality of the
switch to which their AirMagnet sensors will be connected.
Powering Up via an 802.3af-Compliant PoE Injector
To power up A5205 Sensor via an 802.3af-compliant PoE Injector:
1)
Connect the PoE injector (via the Data Only port) to a network
switch or hub, using a 10/100 Ethernet cable.
2)
Connect the PoE injector (via the Power and Data port) to A5205
Sensor using another 10/100 Ethernet cable.
3)
Plug the power cord into an electrical outlet. See Figure 3-2.
Figure 3-2: Powering up A5205 via 802.3af-compliant
A5205
A5205 Sensor User Guide.book Page 16 Thursday, January 15, 2009 1:46 PM