SouthWing BOFLX User Manual
USER GUIDE
® Bluetooth is a registered trademark owned by Bluetooth SIG, Inc. U.S.A. and
licensed to SouthWing.
* The features marked with an asterisk will only work with Bluetooth phones which
support the Hands-free profile. Today, most Bluetooth phones support this profile.
Note:
Please read the “Safe Usage Guidelines” and “Limited Warranty” before using the
headset.
INTRODUCTION
Thank you for choosing a SH240 Bluetooth® headset from SouthWing. This user guide
provides all the information you will need to use and care for your product. All relevant
information regarding your SouthWing product can be found in the support section of
our website: www.southwing.com
1. CHARGING THE HEADSET
You will need to charge the battery of your headset. To do so, follow these steps:
1. Plug the power supply into a power outlet.
2. Plug the connector of the power supply into the USB Charging Socket [1]. The
Indicator Light [2] will turn red to indicate the headset battery is charging.
3. Once the Indicator Light [2] turns off, the headset is fully charged and can be
removed from the power supply.
® Bluetooth is a registered trademark owned by Bluetooth SIG, Inc. U.S.A. and
licensed to SouthWing.
* The features marked with an asterisk will only work with Bluetooth phones which
support the Hands-free profile. Today, most Bluetooth phones support this profile.
Note:
Please read the “Safe Usage Guidelines” and “Limited Warranty” before using the
headset.
INTRODUCTION
Thank you for choosing a SH240 Bluetooth® headset from SouthWing. This user guide
provides all the information you will need to use and care for your product. All relevant
information regarding your SouthWing product can be found in the support section of
our website: www.southwing.com
1. CHARGING THE HEADSET
You will need to charge the battery of your headset. To do so, follow these steps:
1. Plug the power supply into a power outlet.
2. Plug the connector of the power supply into the USB Charging Socket [1]. The
Indicator Light [2] will turn red to indicate the headset battery is charging.
3. Once the Indicator Light [2] turns off, the headset is fully charged and can be
removed from the power supply.
Please Note:
· The headset will not function while charging.
· If the Indicator Light [2] remains off while charging, the battery is already fully charged and does not
require further charging.
· To maximize battery life, do not charge the headset for extended periods of time.
· Full battery capacity will be achieved after two or three full charge/discharge cycles.
· When your battery is empty, it takes up to three hours to completely charge your headset.
· The headset will not function while charging.
· If the Indicator Light [2] remains off while charging, the battery is already fully charged and does not
require further charging.
· To maximize battery life, do not charge the headset for extended periods of time.
· Full battery capacity will be achieved after two or three full charge/discharge cycles.
· When your battery is empty, it takes up to three hours to completely charge your headset.
2. PAIRING THE HEADSET
Auto-pairing
For added convenience, your headset has an auto-pairing function so that when you turn
the headset on for the first time, it is already in pairing mode. The Indicator Light [2]
will flash red and blue alternatively and a series of high tones can be heard. Follow
these steps to pair the headset with your mobile phone:
1. Put the mobile phone into pairing mode (reference your phone user manual). Ensure
that the mobile phone is no more than 3 feet (1meter) away from the headset.
2. Select the headset name “SouthWing SH240” from the list
3. Enter the PIN number: 0000
Now the headset and your mobile phone are paired and ready for hands free
communication through the Bluetooth connection.
To save battery you can disconnect the headset and your phone by pressing the Multi-
function button [2] three times. To re-connect them press the Multi-function button [2]
once.