SouthWing PEDR User Manual

 

1

 
Note: Please read the “Safe Usage Guidelines” and “Limited Warranty” before using the Headset.

 

 
1. Charging the Headset 
You will need to charge the battery of your Headset. To do so, follow these steps: 

1. Plug the power supply into a power point 

2. Plug the connector of the power supply into the USB Charging Socket [1]. The Indicator Light [2] will turn green to indicate 
the Headset battery is charging 

3. Once the Indicator Light [2] turns off, the Headset is fully charged and can be removed from the power supply  

•

 The Headset will not function while charging. 

•

 If the Indicator Light [2] remains off when charging, the battery is already fully charged and does not require further 

charging.  

•

 To maximise battery life, do not charge the Headset for extended periods of time. 

•

 Full battery capacity will be achieved after two or three full charge/discharge cycles. 

•

 When your battery is flat, it takes up to four hours to completely charge your headset

For added convenience, your headset has an auto-pairing function so that when you turn the headset on for the first time, it is 
already in pairing mode (you will also hear a series of high tones). Then, follow these steps: 

1. Put the mobile phone into pairing mode (see the instructions which came with your phone). Ensure that the mobile phone is 
no more than 1 metre away from the headset. 

                                                 

®

 

Bluetooth is a registered trademark owned by Bluetooth SIG, Inc. U.S.A. and licensed to SouthWing.