Moxa VPort 351-M-SC VPORT 351-M-SC Leaflet
Product codes
VPORT 351-M-SC
1
w w w. m o x a . c o m
i n f o @ m o x a . c o m
IP Surveillance
Video
Video Compression: MJPEG or MPEG4 (ISO/IEC 14496-2)
Video Inputs: 1, BNC connector (1.0 Vpp, 75 ohms)
Video Outputs: 1, loop-through BNC connector
NTSC/PAL: Auto-sensing or manual
Video Resolution and FPS (frames per second):
Video Inputs: 1, BNC connector (1.0 Vpp, 75 ohms)
Video Outputs: 1, loop-through BNC connector
NTSC/PAL: Auto-sensing or manual
Video Resolution and FPS (frames per second):
Full motion, 1-channel MJPEG/MPEG4 industrial video encoder
VPort 351 Series
The VPort 351 is a high performance, 1-channel industrial video
encoder that provides up to full D1, full frame rate performance (NTSC:
720 x 480 @ 30 FPS; PAL: 720 x 576 @ 25 FPS) and supports a dual
MJPEG/MPEG4 algorithm, making it especially well-suited for use with
distributed surveillance systems in critical industrial applications. In
encoder that provides up to full D1, full frame rate performance (NTSC:
720 x 480 @ 30 FPS; PAL: 720 x 576 @ 25 FPS) and supports a dual
MJPEG/MPEG4 algorithm, making it especially well-suited for use with
distributed surveillance systems in critical industrial applications. In
Industrial design with -40 to 75°C operating temperature and
›
fiber optic Ethernet port
Video stream up to 30 frames/sec at full D1 (720 x 480) resolution
›
Pre/post-alarm video recording function for advanced
›
surveillance
Transparent PTZ control for legacy PTZ control panels and
›
keyboards
2-way (1 in, 1 out) audio supported
›
Free VPort SDK PLUS and 4-channel video surveillance software
›
addition, a continuous pre/post event trigger video record function can
help system administrators determine why an alarm was triggered,
and 2-way audio is provided for the convenience of real-time
communication between system administrators located at the central
site, and engineers in the field.
help system administrators determine why an alarm was triggered,
and 2-way audio is provided for the convenience of real-time
communication between system administrators located at the central
site, and engineers in the field.
NTSC
PAL
Size
Max. FPS
Size
Max. FPS
QVGA
320 x 240
30
320 x 288
25
CIF
352 x 240
30
352 x 288
25
VGA
640 x 480
30
640 x 576
25
4CIF
704 x 480
30
704 x 576
25
Full D1
720 x 480
30
720 x 576
25
GPIO
Digital Inputs: 2, max. 8 mA
High: +13 to +30 V; Low: -30 to +3 V
Relay Outputs: 2, max. 24 VDC @ 1 A
High: +13 to +30 V; Low: -30 to +3 V
Relay Outputs: 2, max. 24 VDC @ 1 A
LED Indicators
STAT: Indicates if the system booted properly or not
PWR1: Power 1
PWR2: Power 2
FAULT: Can be configured to correspond to system alarm, power
failure, or disconnected network
VIDEO: Video input signal active
AUDIO TEST: Audio input signal in test mode
PTZ: PTZ control signal active
PWR1: Power 1
PWR2: Power 2
FAULT: Can be configured to correspond to system alarm, power
failure, or disconnected network
VIDEO: Video input signal active
AUDIO TEST: Audio input signal in test mode
PTZ: PTZ control signal active
Power Requirements
Input Voltage: 2 12/24 VDC or 24 VAC inputs for redundancy
Power Consumption: Max. 8 W
Power Consumption: Max. 8 W
Physical Characteristics
Housing: Metal, IP30 protection
Dimensions: 52.98 x 135 x 105 mm (2.09 x 5.31 x 4.13 in)
Weight: 960 g
Installation: DIN-Rail mounting, wall mounting (with optional kit)
Dimensions: 52.98 x 135 x 105 mm (2.09 x 5.31 x 4.13 in)
Weight: 960 g
Installation: DIN-Rail mounting, wall mounting (with optional kit)
Alarms
Pre/Post Alarm: 9 MB memory for video recordings
Video Motion Detection: Includes sensitivity tuning
Video Loss: Video loss alarm
Scheduling: Daily repeat timing schedule
Imaging: JPEG snapshots for pre/trigger/post alarm images
Email/FTP Messaging: Automatic transfer of stored images via email
or FTP with event-triggered actions
Custom Alarms: HTTP event servers for setting customized alarm
actions
Video Motion Detection: Includes sensitivity tuning
Video Loss: Video loss alarm
Scheduling: Daily repeat timing schedule
Imaging: JPEG snapshots for pre/trigger/post alarm images
Email/FTP Messaging: Automatic transfer of stored images via email
or FTP with event-triggered actions
Custom Alarms: HTTP event servers for setting customized alarm
actions
Video Viewing:
• Adjustable image size and quality
• Timestamp and text overlay
• Adjustable image size and quality
• Timestamp and text overlay
Audio
Audio Inputs: 1 Line-in or MIC-in with 3.5 mm phone jack
Audio Outputs: 1 Line-out with 3.5 mm phone jack
Audio Outputs: 1 Line-out with 3.5 mm phone jack
Network
Protocols: TCP, UDP, HTTP, SMTP, FTP, Telnet, NTP, DNS, DHCP,
UPnP, RTP, RTSP, ICMP, IGMPv3, QoS, SNMPv1/v2c/v3, DDNS
Ethernet: 1 10/100BaseT(X) auto negotiating RJ45 port, or 1
100BaseFX fiber port (Single/multi mode, SC connector)
UPnP, RTP, RTSP, ICMP, IGMPv3, QoS, SNMPv1/v2c/v3, DDNS
Ethernet: 1 10/100BaseT(X) auto negotiating RJ45 port, or 1
100BaseFX fiber port (Single/multi mode, SC connector)
Serial Port
PTZ Ports: 1, RS-232/422/485 port (terminal block connector),
max. speed of 115.2 Kbps
Console Port: 1 RS-232 RJ45 port
max. speed of 115.2 Kbps
Console Port: 1 RS-232 RJ45 port
Specifications
Introduction