Trinus Systems Inc. TDSS-900B User Manual
User’s Guide
●
Read this user’s guide carefully for safe operation and proper
use of the product .
●
Features and specifications are subject to change without
notification.
TDSS-900
900MHz Series
WIRELESS TRANSCEIVER SYSTEM
- Connect the battery pack to TX Set and switch the
power ON (located on the bottom of TX unit)
- Install the bracket by using the screws
- Connect the antenna to the RX Set
- Slide RX Set onto the Bracket
- Connect the RJ-45 cable to RX Set
- Prior to use, charge the unit by placing TX set in the
- Connect the antenna to the RX Set
- Slide RX Set onto the Bracket
- Connect the RJ-45 cable to RX Set
- Prior to use, charge the unit by placing TX set in the
RX set for at least for 5 hours
- Place TX in RX to match ID
- Connect the microphone to TX set
- Once TX and RX matching ID is done and TX leaves from RX,
- Connect the microphone to TX set
- Once TX and RX matching ID is done and TX leaves from RX,
Transmitter always set to talk with Docking
and are able to send the Audio signal anytime.
and are able to send the Audio signal anytime.
INSTALLATION