Manualsbrain.com
  1. Manuals
  2. Brands
  3. HP
  4. 511885-051
  5. User Manual

HP 511885-051 User Manual

Download
Page of 176
TV tuner module cable
NOTE:
The TV tuner module cable is available in the Cable Kit, spare part number 512832-001.
Before removing the TV tuner module cable, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC Adapter from the computer.
4.
Remove the battery (see 
5.
Remove the following components:
a.
Hard drive (see 
b.
Optical drive (see 
).
c.
Switch cover and keyboard (see 
d.
Display assembly (see 
).
e.
Top cover (see 
f.
USB board (see 
g.
System board (see 
Remove the TV tuner module cable:
1.
Release the clips (1) built into the base enclosure that secure the TV tuner antenna connector.
2.
Remove the TV tuner antenna connector (2) from the clip built into the base enclosure.
3.
Remove the TV tuner module cable (3) from the clips and routing channel built into the base
enclosure.
Reverse this procedure to install the TV tuner module cable.
Component replacement procedures 103