HP 511885-051 User Manual

The following procedure explains how to change the language of the Setup Utility. If the Setup Utility is
not already running, begin at step 1. If the Setup Utility is already running, begin at step 2.

Open the Setup Utility by turning on or restarting the computer. While the “Press the ESC key for
Startup Menu” message is displayed in the lower-left corner of the screen, press 

f10

.

– or –

Open the Setup Utility by turning on or restarting the computer. While the “Press the ESC key for
Startup Menu” message is displayed in the lower-left corner of the screen, press 

esc

. When the

Startup Menu is displayed, press 

f10

.

Use the arrow keys to select System Configuration > Language, and then press 

enter

.

Use the arrow keys to select a language, and then press 

enter

.

When a confirmation prompt with your language selected is displayed, press 

enter

.

To save your change and exit the Setup Utility, use the arrow keys to select Exit > Exit Saving
Changes, and then press 

enter

.

Your change goes into effect immediately.

Because the Setup Utility is not Windows based, it does not support the TouchPad. Navigation and
selection are by keystroke.

●

To choose a menu or a menu item, use the arrow keys.

●

To choose an item in a list or to toggle a field, for example an Enable/Disable field, use either the
arrow keys or 

f5

 or 

f6

.

●

To select an item, press 

enter

.

●

To close a text box or return to the menu display, press 

esc

.

●

To display additional navigation and selection information while the Setup Utility is open, press

f1

.

110 Chapter 5   Setup Utility