HP 511885-051 User Manual

The hard drive spare part kit includes left and right bracket rails, a connector cable, Mylar cover

with tab, and 4 rubber isolators.

160 GB, 5400 rpm

511873-001

250 GB, 7200 rpm (select models only)

511874-001

250 GB, 5400 rpm

511875-001

320 GB, 7200 rpm (select models only)

511876-001

320 GB, 5400 rpm

511877-001

400 GB, 5400 rpm

511878-001

500 GB, 5400 rpm (select models only)

511879-001

Hard Drive Hardware Kit (includes left and right bracket rails, connector cable, Mylar cover with
tab, and 4 rubber isolators)

483862-001

Before removing the hard drive, follow these steps:

Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.

Disconnect all external devices connected to the computer.

Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.

Remove the battery (see 

Remove the hard drive:

Position the computer with the front toward you.

Loosen the two Phillips PM2.5×5.5 captive screws (1) that secure the hard drive bay cover to the
computer.

Component replacement procedures

69