Shenzhen Delux Industry Co. Ltd. M10203 User Manual

10M

 Effective Distance

1. Open the battery cover

■

■

TO CREATE VALUE FOR OUR  CUSTOMERS

User Manual

■

■

      Please take out the batteries if you do not use the 
      wireless mouse for long time, and keep them in a  
      cool and dry place.
      
      Please do not use the battery if leaking, discoloration, 
      distortion or other abnormity happens.

■

■

2. Put  battery in correct direction

3. Cover the battery cover

      

In order to achieve the best economical effect, the 
intelligent power saving technology is adopted. When 
your mouse stops moving, it will switch to the power-
saving mode automatically,and as the time pass, it will 
use less and less power.

1.Keep the ON/ OFF switch on OFF mode if you do not

 use the mouse for a long time.

2. It will save more power to use the mouse on light 

color media than the dark one.

Connecting the receiver to the PC by the USB port, 
for desktop, USB extending port or front-set USB port 
is better.
When the receiver is plugged into USB port, 
computer will detect the device automatically. Mouse 
could works normally with ON mode
If the mouse can't work normally, you should build up 
connections between the mouse and receiver      

      

Pull out the receiver from the USB port, press the left, 
right and middle buttons then press the power ON/OFF 
switch to ON. One second later, release the key and 
connect the receiver to the USB port. The distance 
between mouse and receiver is about 20 cm. If the 
mouse can work, the connection is successfully built. If 
not, repeat the above steps. 

The radio signal can penetrate lignin, glass and other
the non-metallic objects, realizing 360 degree free 
 transmit, however, it can not penetrate the metal 
materials.So please not put the mouse, keyboard 
and the receiver onto the metallic tabletop. The 
ideal distance is above 20 CM.

Please be sure there is no big metal between the 
 mouse and receiver, otherwise the connection 
will be affected; for desktop, USB extending port
or front-set USB port is better.

The receiver should be far away from the monitor, 
outside disc driver or other electronic products.
20 CM distance is suggested in order to prevent 
the radio disturbance produced by other 
electronic products.  
 
Optical mouse is suitable for operating media 
wooden,paper or cloth, but not for the lens 
cover, such as glass and smooth rubber. A 
mouse pad is needed in such environment.

 

The standardized receiving distance we offered 
is under certain radio disturbance environment,
the normal environment are better, the actual 
receiving distance is higher than standardized, 
but if mix-machine, motor, electric drill and other 
strong electronic equipments operating nearby, 
which may lead to slowly receiving or other abnormity.

Reduce the distance of the receiver and the mouse  

Put the “on-off” button to “On”

Make sure the battery is correctly installed.

2.4G wireless technology, 16 channel intelligent 

frequency

Advanced and precise optical positioning technology, 

fast and flexible cursor

With ON/OFF switch, OFF mode would save power if the 

mouse doesn't work for a long time 

Intelligent power-saving mode, able to prolong the 

battery using time

Re-establish the mouse and the receiver 
communication channel.

Check whether the battery capacity is enough 

Check the receiver again, and make sure it is 
connected to the USB port. 

M102GX+ G07UF

This equipment has been tested and found to comply 
with the limits for a Class B digital device, pursuant to 
part 15 of the FCC Rules. These limits are designed to 
provide reasonable protection against harmful 
interference in a residential installation. This equipment 
generates, uses and can radiate radio frequency energy 
and, if not installed and used in accordance with the 
instructions, may cause harmful interference to radio 
communications. However, there is no guarantee that 
interference will not occur in a particular installation. If 
this equipment does cause harmful interference to radio 
or television reception, which can be determined by 
turning the equipment off and on, the user is 
encouraged to try to correct the interference by one or 
more of the following measures: 
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and 
   receiver. 
—Connect the equipment into an outlet on a circuit 
   different from that to which the receiver is connected. 
—Consult the dealer or an experienced radio/TV 
   technician for help. 

This device must not be co-located or operating in 
conjunction with any other antenna or transmitter. 
Operation is subject to the following two conditions: 
    (1) this device may not cause harmful interference, and 
    (2) this device must accept any interference received, 
    including interference that may cause undesired 
    operation.

Caution! 
The manufacturer is not responsible for any radio or TV 
interference caused by unauthorized modifications to 
this equipment. Such modifications could void the user 
authority to operate the equipment.