Westermo Teleindustri AB GD01US User Manual
5
6696-2230
3. Safety
General:
Before using this unit, read this manual completely and gather all information
on the unit. Make sure that you understand it fully. Check that your application
does not exceed the safe operating specifications for this unit.
Before using this unit, read this manual completely and gather all information
on the unit. Make sure that you understand it fully. Check that your application
does not exceed the safe operating specifications for this unit.
Before installation, maintenance or modification work:
Prevent damage to internal electronics from electrostatic discharges (ESD)
by discharging your body to a grounding point (e.g. use of wrist strap).
Hazardous voltage may occur within this unit when connected to power supply.
Prevent access to hazardous voltages by disconnecting the unit from power
supply and all other electrical connections.
Prevent damage to internal electronics from electrostatic discharges (ESD)
by discharging your body to a grounding point (e.g. use of wrist strap).
Hazardous voltage may occur within this unit when connected to power supply.
Prevent access to hazardous voltages by disconnecting the unit from power
supply and all other electrical connections.
Installation:
This unit should only be installed by qualified personnel.
This unit should be built-in to an apparatus cabinet, or similar, where access is
restricted to service personnel only.
The power supply wiring must be sufficiently fused, and if necessary it must be
possible to disconnect manually from the power supply. Ensure compliance to
national installation regulations.
This unit uses convection cooling. To avoid obstructing the air flow around the
unit, follow the spacing recommendations (see Installation section).
This unit should only be installed by qualified personnel.
This unit should be built-in to an apparatus cabinet, or similar, where access is
restricted to service personnel only.
The power supply wiring must be sufficiently fused, and if necessary it must be
possible to disconnect manually from the power supply. Ensure compliance to
national installation regulations.
This unit uses convection cooling. To avoid obstructing the air flow around the
unit, follow the spacing recommendations (see Installation section).
!
!
!
3.1 GSM specific
Important safety information / operating environment
Please read and follow the guidelines listed below.The precautions must be observed
during all phases of the operation. Breaking these rules may be dangerous, illegal or affect
performance of the unit and/or invalidate the units approval and/or warranty.
Please read and follow the guidelines listed below.The precautions must be observed
during all phases of the operation. Breaking these rules may be dangerous, illegal or affect
performance of the unit and/or invalidate the units approval and/or warranty.
3.1.1 General
Remember to follow any special regulations and warnings in force in any area and never
use the unit whenever it’s forbidden to use it.
Do not use the unit when it may cause interference or danger. A wireless device
exposed to interference above specified limits could result in deteriorated performance.
use the unit whenever it’s forbidden to use it.
Do not use the unit when it may cause interference or danger. A wireless device
exposed to interference above specified limits could result in deteriorated performance.